jlarrabee
Veteran
- Joined
- Jun 7, 2006
- Messages
- 36
- Reaction score
- 1
- Points
- 708
- Location
- South China, Maine
- Country
- USA
- Snowmobile
- 2013 Nytro XTX 1.75 Backcountry
I've been trying to find posts on guys who have instructions or templates for cutting an '05 RX1 gas tank shroud (cover) to fit an 06 Nytro seat. Any help links or direction would be greatly appreciated. A templatte would be AWESOME!! This site is the best! 
I think it is about 3 1/2 inches that has to be cut out.
Its about 3.25-3.5" at the center of the tank shroud down to nothing at the outer edge of the shroud.
DaJudge
Lifetime Member
- Joined
- Nov 29, 2005
- Messages
- 334
- Reaction score
- 3
- Points
- 993
- Location
- West Michigan
- Country
- USA
- Snowmobile
- '06 Rage
There is a bunch of threads on this subject. Here is a link to the one that I was involved in when I put a Nytro seat on my rage. There are some pics there to give you an idea as to what you have to do. http://www.ty4stroke.com/viewtopic.php? ... +seat+rage
