Mikecam
TY 4 Stroke Junkie
Need some help for a starting issue. I did some searching but didn't really find what I'm looking for.
03 RX1 seems to start fine but only runs for 1 or 2 seconds then stops like I hit the kill switch. I start it again and it does it again, sometimes. Other times it starts and stays running fine.
It does not slowly die but stops dead. All stock, hoping for help. Thanks
03 RX1 seems to start fine but only runs for 1 or 2 seconds then stops like I hit the kill switch. I start it again and it does it again, sometimes. Other times it starts and stays running fine.
It does not slowly die but stops dead. All stock, hoping for help. Thanks
Mikecam
TY 4 Stroke Junkie
UPDATE
Turned out to be the installation of the stator cover dislodging the pick up coil which then rubbed on the AC mag rotor.
Turned out to be the installation of the stator cover dislodging the pick up coil which then rubbed on the AC mag rotor.
Crewchief47
Lifetime Member
- Joined
- Jan 16, 2006
- Messages
- 2,830
- Location
- McGregor, ON Canada
- Country
- Canada
- Snowmobile
- 2008 Nytro MTX 45th
Well, that certainly would have been hard to Internet trouble shoot. Glad you found it!
