Ted Jannetty
TY 4 Stroke God
givemeaboost said:Are you still running the 2560 on it ?
Ken.......
GT2871R
Ted.
wantboost
Expert
Ted could I get your opinion on the gtx2860 with the bilet wheel and the tial ss vband housing.it would be with a custom race header like yours.i was told the billet wheel might spool just a tad slower but will outflow the same cast wheel.
nd
nd
machzrobbie
Expert
I'll throw my opinion out there - not that it counts for anything - the GTX is a great turbo, little pricey compared to the GT - but the biggest problem is if you every have a issue with the turbo the only option for rebuilt is a center section from garrett, no one can get parts to rebuild it.
wantboost
Expert
Did not know that about the center section, good info
Ted Jannetty
TY 4 Stroke God
wantboost said:Ted could I get your opinion on the gtx2860 with the bilet wheel and the tial ss vband housing.it would be with a custom race header like yours.i was told the billet wheel might spool just a tad slower but will outflow the same cast wheel.
nd
Being a Garrett performance distributor if it is available we can get it, would I move to a GTX2860, No sir.
The 2871 Serves me well and I see no need to change at this time.
There is still more left in the turbo and I need to harness what I have before I move the power level up again.
Chassis, clutch, chassis, clutch, chassis, clutch, you get the idea.
albin
Newbie
- Joined
- Apr 10, 2013
- Messages
- 11
- Country
- Sweden
- Snowmobile
- Apex overload
impressive!
Do you have some photo or Movie?
Do you have some photo or Movie?
Ted Jannetty
TY 4 Stroke God
albin said:impressive!
Do you have some photo or Movie?
https://www.youtube.com/watch?v=D-m3yl4A7TU
ghost rider
Suspended
- Joined
- Nov 13, 2013
- Messages
- 495
- Age
- 65
- Location
- Muskoka, Ontario, Canada
- Country
- Canada
- Snowmobile
- Rxwarrior
- LOCATION
- Muskoka , Ontario
Great video....I would love to strap a go pro to the front bumper and watch the monster run.
om600
Newbie
- Joined
- Sep 15, 2013
- Messages
- 23
- Location
- Nova Scotia,Canada
- Website
- www.oakridgecabinetsmillwork.com
- Country
- Canada
- Snowmobile
- osp viper outlaw
Is that with stock clutches?
Ted Jannetty
TY 4 Stroke God
om600 said:Is that with stock clutches?
STM 8 arm up front Yamaha Secondary and spring with Dalton Helix.
rxrider
Jan-Ove Pedersen
- Joined
- Apr 25, 2003
- Messages
- 7,355
- Age
- 59
- Location
- Lakselv - 70N & 25E
- Country
- Norway
- Snowmobile
- 2014 Phazer XTX, 2013 Phazer RTX, 2008 Apex RTX, 2007 Warrior, 2006 Attak
Great work Ted and Ted
The old RX-1 rocks, I'm still running mine.
rxrider
The old RX-1 rocks, I'm still running mine.
rxrider
Yamadog
Lifetime Member
That is awesome I remember following your progress back ealy in the process and it has come far pilgrim. I bet it is a handfull on the trails though
Incredible to watch the launch all the energy is used forward almost no lift of the nose!!
Incredible to watch the launch all the energy is used forward almost no lift of the nose!!
Ted Jannetty
TY 4 Stroke God
UPDATE this is 2016 we never had any good Ice when the 2017 race season started and all the races got cancelled.
My son worked his butt off from April of 2016 to December, we tested 5 weeks in a row,We have a stellar set up this year too bad we couldn't get it on the timers.
We believe the sled is faster than ever before.
My son worked his butt off from April of 2016 to December, we tested 5 weeks in a row,We have a stellar set up this year too bad we couldn't get it on the timers.
We believe the sled is faster than ever before.
gouldsjett1
Lifetime Member
I hope you got your receipt because you just checked out! That's flying for sure, what was the 60' if you don't mind saying
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.