BlkNytro
Expert
Well last year, I started my sled, it ran, but the headlights did not come on and my light for the spedo didn't turn on. What is wrong? It works now with no problem.
Nytro-Electrical-Lights
- Thread starter BlkNytro
- Start date
buddah
Lifetime Member
- Joined
- Apr 14, 2003
- Messages
- 1,483
- Reaction score
- 284
- Points
- 1,288
- Location
- Wetmore, MI
- Country
- USA
- Snowmobile
- '17 Sidewinder B-TX LE
Was it extremely cold when that happened? I had that happen once on mine....but it was like -20 or so. Let it run for a minute or so and everything came on just fine. And no, I didn't go riding, just needed to move it out of the way. Just call me "Sissy Boy"!!! 
yamaha1
Lifetime Member
- Joined
- Dec 16, 2005
- Messages
- 275
- Reaction score
- 2
- Points
- 823
- Location
- Shakopee, MN originaly from Fargo ND
Yes...that is correct if it is really cold out when you start it the headlight and gauge lights will not come on. This is to lessen the current draw right away until the sled has warmed up some. After it warms up everything should come on by itself. If it doesn't after the sled is good and warm then there might be something wrong.
BlkNytro
Expert
Yea, it was cold..about -10 out..The lights did turn on after a good 1 min. of warm up time, but it was dark out, so I had to just sit their.
