Post Your Clutch Setup

Power Mods=Hurricane turbo 190
Clutch Kit=Hurricane
Belt=8Dn
Belt width and length=
Weights=STM 60gram base 8 1gram washers in heel 4 gram washers in tip middle empty. 72.6 grams total.
Helix=51-43
Primary Spring=OPO
Secondary Spring=EPI PURPLE
Wrap=0-1
Machined for overdrive=N/A
Machined for 8DN length belt=N/A
OSP Deflection Adjuster w/plate removed=YES
RPMS at engagement Recall or Indicated=3400
RPMS at top speed and top speed Recall or Indicated=8900 100MPH
Miles on sled=4000 KM
Observations:Pulls hard to 100 ski's don't touch the ground all the way great trail sled for sure added washers behind actuator to bring it to 6 lbs boost.
 
Power Mods= Excell intake, EVO 2.5, stock exhaust
Clutch Kit= TP Big Venom
Belt= Gates carbon
Belt width and length=8dn
Weights=TP Big Venom, 1” heel, alum with thin washer in middle and tip.
Helix=43
Primary Spring=WPW
Secondary Spring=TP Orange
Wrap=3-1
Machined for overdrive=No
Machined for 8DN length belt=Yes
OSP Deflection Adjuster w/plate removed=No
RPMS at engagement Recall or Indicated=3200
RPMS at top speed and top speed Recall or Indicated=9100
Miles on sled=11K
Observations:Engagement is smooth, 99mph GPS down hill with a breeze.
 
Last edited:
Copy paste into your post and fill in the specs.
Power Mods= Hurricane 190 turbo
Clutch Kit= Hurricane
Belt= 8JP
Belt width and length=
Weights=STM
Helix= Dalton 51-43
Primary Spring= Dalton black/teal
Secondary Spring=purple
Wrap=0-1
Machined for overdrive=no
Machined for 8DN length belt=no
OSP Deflection Adjuster w/plate removed=yes
RPMS at engagement Recall or Indicated=2700
RPMS at top speed and top speed Recall or Indicated=8700-8800
Miles on sled=6000km
Observations: sled works very well just need more traction. 117 mph GPS.
 


Back
Top