Powderhound 7" toe setting?

[Svartstreck]

I've been looking around for toe settings on the 7" powderhounds, but i didn't find anything spot on what I was searching for.

How much toe in/out am I supposed to run, and from which points on the skis have you measured?

 

[AttakDog]

Just like stock. Put a very light bungee cord on the ski tips to remove all the slop. Then set it to 1/4" to 3/8" toe out. I measure at the front and rear carbide mount studs. You can also use a long straight edge along the track to align the carbides with the rear suspension if you really want to get picky.

 

[Svartstreck]

Just like stock. Put a very light bungee cord on the ski tips to remove all the slop. Then set it to 1/4" to 3/8" toe out. I measure at the front and rear carbide mount studs. You can also use a long straight edge along the track to align the carbides with the rear suspension if you really want to get picky.

Thanks =)

Will be installing a relocator next week and just wanted to make sure since everything is going to be realigned hehe