snowriderjoe
Extreme
- Joined
- Feb 23, 2006
- Messages
- 98
- Reaction score
- 3
- Points
- 708
- Location
- Champlin, Mn
- Country
- USA
- Snowmobile
- 2014 Yamaha Viper L-TX
I am trying to remove the chaincase cover from my '09 Nytro so that I can replace the lower gear bolt that alot of people have had problems with.
I have everthing off (brakes, spacer on the shaft and all of the bolts) and I can't get the cover to come loose. I don't want to break anything, so I'm wondering what other people have done to get the cover loose. I've tryed prying it loose with a screw driver and tapping it with a rubber mallet.
Thanks for any advice.
I have everthing off (brakes, spacer on the shaft and all of the bolts) and I can't get the cover to come loose. I don't want to break anything, so I'm wondering what other people have done to get the cover loose. I've tryed prying it loose with a screw driver and tapping it with a rubber mallet.
Thanks for any advice.
1049triple
Expert
- Joined
- Jan 19, 2009
- Messages
- 340
- Reaction score
- 87
- Points
- 888
- Location
- Pohenegamook, Qc
- Country
- Canada
- Snowmobile
- 2025 SRX
2018 High Country 9000
2001 SRX 700
Did you remove the 2 little 10mm heads bolts that hold the reverse idler pulley and the chain tensioner?
thetruck454
TY 4 Stroke Junkie
I had to tap mine with a rubber hammer and it popped right off.
yox185
TY 4 Stroke Master
1049triple said:
What triple said. Two little bolts on the Nytros, RX chassis have one.
snowriderjoe
Extreme
- Joined
- Feb 23, 2006
- Messages
- 98
- Reaction score
- 3
- Points
- 708
- Location
- Champlin, Mn
- Country
- USA
- Snowmobile
- 2014 Yamaha Viper L-TX
chaincase bolts
Are these the two bolts you are referring to?
They don't mention having to remove these in the service manual.
Is there a hassle with putting them back in when replacing the cover?
Are these the two bolts you are referring to?
They don't mention having to remove these in the service manual.
Is there a hassle with putting them back in when replacing the cover?
Zakre
TY 4 Stroke Guru
Those are the bolts they are talking about, be careful when you loosen them as there is a spring behind the cover that will pop it off and then stuff can go flying everywhere.
