Gone Blue
VIP Member
- Joined
- Oct 11, 2006
- Messages
- 1,614
- Age
- 61
- Location
- Howell, Michigan
- Country
- USA
- Snowmobile
- 08' Nytro RTX 40th Anniversary - Stretched
I posted my mod replacing the welded zerk fittings with theaded 304 SS zerks on the Nytro page and thought others might be interested in this as well. After some 13,000 miles on my 08' Nytro, most of the factory zerks would no longer accept grease. G.B.
ty4stroke.com
Replacing all grease Zerks in Skid
I am completely rebuilding my 08' RTX skid, replacing all the drive line bearings and doing a track swap. There are a few skid Zerk fittings that would no longer accept grease. So I cut them all off and tapped them with M6 x 1.0 threads. Since I cut the Zerks right up behind the Zerk ball, I...
