Cherry08
Pro
Anyone else have issues with the reverse lever freezing and not being able to put it in reverse?
Any fixes for this or how do I prevent it....
Is this something I should be worried about?
Any fixes for this or how do I prevent it....
Is this something I should be worried about?
poor farmer/logger
TY 4 Stroke Junkie
- Joined
- Dec 3, 2012
- Messages
- 543
- Location
- Saskatchewan
- Country
- Canada
- Snowmobile
- 2015 SR Viper XTX 2009 Yamaha Nytro XTX
Only time mine freezes is when I wash it. Thaw it out and put your choice of lubricant on it. Wd40 or what ever you use. Otherwise I don't usually have any problems.
Ryan
Ryan
ryan_p17
Extreme
sometimes when i have a lot of snow/ice around the lever i find it really hard to pull it upwards that little bit to unlatch it. i've used the strap of my glove to pull on it as its a bit awkward. never had it freeze completely.
basic700
TY 4 Stroke Junkie
- Joined
- Mar 5, 2010
- Messages
- 588
- Location
- Norwalk WI
- Country
- USA
- Snowmobile
- 2018 Sidewinder STX DX 146
2015 SRViper XTX LE
2009 Nytro XTX
After your done riding (get home) back it in its parking stall. So next time you can drive it out, after you ride it a while it will thaw out. Happens to me alot
stook
Extreme
Just take some lock deicer and squirt it down the lever shaft takes two seconds. I just carry it with me in my pocket never know when it might come in handy for something else
Cherry08
Pro
Thanks for the tips just hadn't seen anything on it before just making sure I wasn't alone lol
Tyloooor
TY 4 Stroke Junkie
same thing happened to me last night
jonnyz36
Extreme
stook said:Just take some lock deicer and squirt it down the lever shaft takes two seconds. I just carry it with me in my pocket never know when it might come in handy for something else
a BIG X2!!!
ViperTurboPete
TY 4 Stroke Master
- Joined
- Mar 25, 2005
- Messages
- 1,068
- Age
- 57
- Location
- Sudbury, Ontario
- Country
- Canada
- Snowmobile
- 2015 Viper XTX LE MPI Turbo
2022 Expedition Extreme 850
Mine always freezes when it is cold. I have had to pull it out by hand out of the trailer.
This just happened to me yesterday too. Worked fine on the ride but then couldn't move the lever. Thought something was broken, but after it warmed up in the garage seems fine? Could the linkage/gears jam and then unjam - or is it really just frozen? Would have not considered that at all if it wasn't for this post. Must be the cold Manitoba wind!
Similar threads
- Replies
- 3
- Views
- 1K
- Replies
- 4
- Views
- 2K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.