zxmarc
Newbie
hi all
can someone tell me how high of a riser i could use on my 2003 rx-1 without having to change my cables
thanks in advance
can someone tell me how high of a riser i could use on my 2003 rx-1 without having to change my cables
thanks in advance
SHodas
Veteran
3"
RxThunder
Expert
I just did a 2" on mine and it is pretty tight. Had to relocate it to stop it from revving when turned all the way right. In my opinion I would get longer cables for anything over 2"
jdp1under
Expert
- Joined
- Oct 19, 2009
- Messages
- 362
- Location
- CT, NO SNOWVILLE
- Country
- USA
- Snowmobile
- 2010 RS VECTOR GT LTX STOCK FOR NOW!
I did a 3" chux riser 3 years ago no problems like everyone esle you have to do some moving and rerouting.. good luck
MNBlizzard
Expert
I say just get the '04 rx mountain cable for $25. IMO any amount of rise over stock needs the extra cable especially when turning tight. I ran a 2.5" for a ride without the extra cable and sharp corners were scary when the engine didn't brake, actually rev'd.
Similar threads
- Replies
- 0
- Views
- 616