nytrojon13
Newbie
- Joined
- Nov 15, 2018
- Messages
- 2
- Age
- 31
- Location
- Newfoundland
- Country
- Canada
- Snowmobile
- 2006 nitro ER 1000
Hey folks , I have a 2006 rs nytro 1000 , I am wanting to drop a tooth on the top gear. From my research I’ve gathered that the stock gearing is 21/40 with a 68 link chain. Is this correct ? If so. Putting a 20 tooth top gear will I need to change chains or is the stock 68 link chain going to work?
I’m new to the gearing side of things , I have a 1.5 inch track put on it and I just want to achieve a little more bottom end grunt off the start for ditch banging and aggressive trail riding!
Any help will be greatly appreciated!!
I’m new to the gearing side of things , I have a 1.5 inch track put on it and I just want to achieve a little more bottom end grunt off the start for ditch banging and aggressive trail riding!
Any help will be greatly appreciated!!
- Joined
- Jun 28, 2004
- Messages
- 2,436
- Age
- 64
- Location
- Clinton, Wi.
- Country
- USA
- Snowmobile
- '11 Apex XTX, '09 Venture GT, '06 Attak, 08 Nytro Hybrid
Follow this link. https://totallyamaha.com/ You have 21/40 with a 70 link chain. To go to 20/40, you'll need a 68 link chain. All of this information is found in the Tecnical Pages found on the Home website.
- Joined
- Jun 1, 2004
- Messages
- 7,736
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
is the sled clutched or extended? those where already geared lower than the vector 121 sleds.
