Rx1 misfire diagnosed and fixed

[Turbotim]

when I bought this sled a few weeks ago it was firing on all four up until about 30% throttle then a cylinder would cut out.
It felt like spark blow out so I went after the Arcing coil problem but it turned out to be gummed up carb, so I cleaned the carbs and that sorted out the problem.

 

[MrSled]

when I bought this sled a few weeks ago it was firing on all four up until about 30% throttle then a cylinder would cut out.
It felt like spark blow out so I went after the Arcing coil problem but it turned out to be gummed up carb, so I cleaned the carbs and that sorted out the problem.

Ill add this one as well to the FAQ for RX1