equillibrium88
Extreme
- Joined
- Jan 18, 2010
- Messages
- 123
- Reaction score
- 2
- Points
- 718
- Location
- North Bay Ontario
- Country
- Canada
- Snowmobile
- 2007 Phazer GT
Has anyone installed the schmidt bros motorsports stage II kit.
Do you have to remove the main bolt on the primary to get the spring cover off?
Can I replace the secondary's helix and re-install solo? Or is it better with a buddy?
I don't have a clutch holding tool either.
Also, any tips, tricks you all could provide would be extremely appreciated.
Do you have to remove the main bolt on the primary to get the spring cover off?
Can I replace the secondary's helix and re-install solo? Or is it better with a buddy?
I don't have a clutch holding tool either.
Also, any tips, tricks you all could provide would be extremely appreciated.
- Joined
- Nov 1, 2009
- Messages
- 3,564
- Reaction score
- 88
- Points
- 1,483
- Location
- Winnipeg, Manitoba
- Country
- Canada
- Snowmobile
- 2009 Phazer RTX
No need to remove the pricary clutch. There are 6 bolts on the pricary cover that you remove. Mr. Sled has posted a video for that, its the same on the phazer.
http://www.ty4stroke.com/viewtopic.php? ... highlight=
The secondary is easier with 2 people, I posted a video on that, it is in the phazer FAQ.
http://www.ty4stroke.com/viewtopic.php? ... sc&start=0
http://www.ty4stroke.com/viewtopic.php? ... highlight=
The secondary is easier with 2 people, I posted a video on that, it is in the phazer FAQ.
http://www.ty4stroke.com/viewtopic.php? ... sc&start=0
rocklong
Extreme
Pretty straight forward job I think you shoul be able to handle it just fine. Hardest part for me doing it alone was preloading the helix, but once u figure it out it ain't to bad.
