Secondary Clutch Sheave Not True

[Bodacious]

Had the panels off and the clutch gaurd removed last night. Started the engine on the Attak spinning the transmission on the jack stand. Just wanted to see if I could find out where a vibration is comming from at around 60 mph. I noticed that the inner half of the secondary is out of true by an 1/8" it wobbles under way. The outer looks fine. Just wondering if others would try this to see if maybe I have a bad one or is it not abnormal?.....Thanks

 

[Bodacious]

ttt

 

[Randy J Beyer]

Yours is bad ! You should not see a wobble!

Sounds like yours is major out of balance !

 

[LazyBastard]

I agree. 1/8" is a SERIOUS PROBLEM. Change it now before something explodes.

 

[170plus]

we had machined my secondary earlier in the season to reduce weight and to true it up for and i dont remember which half of the secondary was worse but they arent very true when you have them running on a lathe at low speed,dont think it was 1/8' tho but machining them sure makes them look better and lost 1/2 pound off total secondary weight

 

[bjniceguy]

I assume you still have all three buttons in the clutch??