sensitive kill switch

[rodehard]

I have a 2011 Vector with a sensitive kill switch. I need to pull up hard on the switch to get it to start and sometimes it shuts down on the trails. Is there a fix or a disconnect or do I have to buy the entire kill switch/throttle flipper assembly for about $150?

 

[4strokeluvr111]

Check out barnofparts.com for a great price on a used, clean assembly.

 

[radianguy]

Bit late for my advice but you shouldn't be using the kill switch to turn the sled off, use the key. The kill switch is an emergency shut off!

 

[4strokeluvr111]

And if the sled has EFI the ECU doesn't like it at all when you shut it down with the kill switch. ALWAYS use the key!

 

[J1635]

its worn out/broken at this point, replace it with a new or used one. x2 barnofparts

 

[rodehard]

Just an update. It turned out that the rubber seal had worked its way under the button and had caused it not to pull up as far as it should. Relocated the seal and it works fine now. Something to look for, I guess.