ZapeX2
Expert
That looks good. I don't see them on their website. I assume this is something they just came out with? Price?
I bugged them for 2 years[since I got my Attak] to build an Apex version of their SRX/Viper seat.
You have to fill out the seat online order form for the SRX seat and tell them its for an Apex. The seat is for the NON power steering Apexs only...2006 to 2010.
Call them to verify price...I have the first and only one as far as I know.
How hard is it to install WRP seat wrap
yamaha convert
Pro
That's a neat looking seat.
How much taller is this seat than the standard version? I see it says 3", but is that 3" on a Viper or an Apex....
What is it you have at the back of the seat where the tail light used to reside?
Last edited:
The seat is at least 3 inches higher then the standard seat that came on my Attak.
I had one of the original Apex Mountain Boss seats on it last year that did not accommodate the tail light so I installed a Nytro XTX tail lite with a Mountain Apex rear panel...the new Boss seat can accommodate your stock tail lite.
That is all seat at the back of the sled its got lots of pouches for storage.
I had one of the original Apex Mountain Boss seats on it last year that did not accommodate the tail light so I installed a Nytro XTX tail lite with a Mountain Apex rear panel...the new Boss seat can accommodate your stock tail lite.
That is all seat at the back of the sled its got lots of pouches for storage.
yamaha convert
Pro
Thanks for the feedback
I read on their site it uses Velcro to hold it down along with some clips. Are you happy with how secure it is on the sled?
The SRX Boss seat[had for 4 years] and the Boss seat I just removed off of my Attak were secured with Velcro underneath and a couple of snaps up front and I never have had one move but I guess it would depend how hard you ride.
For feed back on this type of seat go to the two stroke side SRX/Viper and read how happy everyone has been with them on their sleds.
ebockus
Pro
was thinking about wrap seat. mrsled how did yours hold up over time? man the American exchange is killing us Canadians on pricing these days.
ebockus
Pro
wrp **
vodoo child
Expert
- Joined
- Oct 29, 2005
- Messages
- 464
- Location
- Palmerton Pa.
- Country
- USA
- Snowmobile
- 2018 Sidewinder LTX/LE 50th
3 seasons and 3,000+ miles and mine's holding up great. $300 and a bottle of Jack to have it put on the stock seat pan. Bite the bullet and do it, you ""WILL NOT"" regret it!
ebockus
Pro
3 seasons and 3,000+ miles and mine's holding up great. $300 and a bottle of Jack to have it put on the stock seat pan. Bite the bullet and do it, you ""WILL NOT"" regret it!
300$ would be no issue, its the exchange and shipping. i be 500$. that takes some contemplating lol. thanks for the feedback. i think more and more about it everyday
DJ Hennessy
Extreme
- Joined
- Jan 30, 2016
- Messages
- 116
- Age
- 45
- Location
- Barrie, ON
- Country
- Canada
- Snowmobile
- 2016 Yamaha Viper RTX SE
2006 Yamaha Apex RTX
That looks awesome! Do you mind me asking what that cost you? I'm 6' and just did 800kms up north in Cochrane Ontario and my knees where ready to quit after the first 300!
evil eagle
Expert
wrp seat on an older gen apex is worth the money. I had one on my last sled. It totally changes even how the sled rides. being up the 3or 4inches overall, it makes the bumps less jarring. With 3 inch risers, the apex sits very close to a viper for height and bar placement.
the vinyl quality is not as good as a factory seat, some slight wear near the stitching.
the vinyl quality is not as good as a factory seat, some slight wear near the stitching.
DJ Hennessy
Extreme
- Joined
- Jan 30, 2016
- Messages
- 116
- Age
- 45
- Location
- Barrie, ON
- Country
- Canada
- Snowmobile
- 2016 Yamaha Viper RTX SE
2006 Yamaha Apex RTX
I like the look of this seat, but why is the back end so loose? Is that a storage area that lays flat like that if not full?
