STOCK SKIES VS.YAMAHA NYTRO mountain skis

[upei93]

the spindle bolts and spacers?

Yup...2 bolts, 4 spacers and the 2 long spacers that fit inside the steering knuckle or spindels. The mountains are wider...

 

[**sj**]

ah...makes sense...essentially the spindle hardware in and around the spindle like the xtx has but longer/wider?

three pieces...and the two longer bolts?

 

[**sj**]

still looking

 

[upei93]

still looking

Have you looked at just buying the bottoms from your dealer and using the parts from your stock skis???

 

[SpecRTX]

still looking

Have you looked at just buying the bottoms from your dealer and using the parts from your stock skis???

I just did. I can buy the ski bottoms for around $70.00 each. The keel is about 1 1/4 inches deep. It looks like a nice ski. I'm still curious how it will perform as an "all around" ski.

 

[**sj**]

hmmm...where did you find them for $70.00...dont forget to add for the spindle bolt,bushing and spacers..

 

[SpecRTX]

hmmm...where did you find them for $70.00...dont forget to add for the spindle bolt,bushing and spacers..

My buddy owns a dealership and mis-ordered a black set of mountain skis (bottoms only). He's been sitting on them. However, you're correct about the mounting parts.

 

[upei93]

hmmm...where did you find them for $70.00...dont forget to add for the spindle bolt,bushing and spacers..

You can get them here for around $100 per ski with the spacers and bolt...
http://www.cyclepartswarehouse.com/fich ... fveh=37864

 

[**sj**]

am I seeing it correct.....ski bottoms along with 11, 13, 14 and 15...7 and 18 are the same though right?

 

[upei93]

am I seeing it correct.....ski bottoms along with 11, 13, 14 and 15...7 and 18 are the same though right?

Yup...sounds right to me...rubber and loop bolts can come from your old ski.

 

[Super Sled]

Anybody know the Snowtracker Extreme part number for/ that will fit the Yammi Mt skis?


Any idea who sells/ improts them into the 'States?



Thx!



Mike

 

[upei93]

Anybody know the Snowtracker Extreme part number for/ that will fit the Yammi Mt skis?


Any idea who sells/ improts them into the 'States?



Thx!



Mike

Looks like they don't have a USA distributor. http://www.snowtracker.com/en/dealers.html

You should be able to get them here though. (page 223 in the fall/winter catalogue)
WWW.royaldistributing.com

 

[**sj**]

I think the mountain and trail are the bolt pattern for carbides?

 

[SledFreak]

if the stock runners are interchangeable, then the sno-trackers will work on either ski.

 

[upei93]

if the stock runners are interchangeable, then the sno-trackers will work on either ski.

Yes they do I took the snow trackers that I ran on my stock skis and mounted them on my mountain skis...if you look closely at the pic I posted one is a stock ski and one is a mountain ski.