Studding a Cobra....1.45?, 1.375?, 1.325?.

[Roost 'Er]

Looks like a nice set-up. I too think the 1.375s are the ticket!

 

[shadow44]

Id be buying a 2-Ply Cobra, 9061 i believe the number is. Not interested in a Single-ply track at this point. Camoplast does make both versions of the Cobra though a 1-ply and a 2-ply.

Im looking for the best all around traction, with good reliability. So im leaning towards middle of the road 1.375s right now.

Gil, ill take a look at the thread, even stud sizing can get confusing with each manufacturer measuring differently.

Shadow- Im going to try and gear it very much like my SRX back in the day, as long as i can pull 100mph im happy. More interested in corner to corner then top end. If i recall i ran a 22-38 gearing on my SRX?

I ran 22/38 last season and it pooped the bed...even with my mods. I am going back to 21/39....sled had way more jamb with stock gearing. I know your going to boost so you may be fine, but I was very dissappointed with 22/38 gearing, sled felt sluggish, and I was getting beat at the 800ft mark by a sled that couldn't come close in 1700ft the season prior. IF you don't care about top end, leave the gearing stock.