studs and how many??

[bigcountry]

i'm looking to stud my 04 warrior it has and excell exhaust, k&n filters and the stock ripsaw track. how many studs should i put in my track?? and what about tunnel protectors?? i weigh around 380 and bottom out from time to time, this makes me worry about putting on studs!!??

 

[Sasquatch]

162 up the middle. Yes to the tunnel protectors but they already should be there.

 

[bigcountry]

how tall of studs should they be with the stock ripsaw track??

 

[NJNYTRO]

96 down the center. 1.25 lugs so just a hair bigger than lugs

 

[sleddheadd]

i go about 320lbs. and i just put 108 double backers down the center. 1.4", bought them from rich motorsports. 108 gives you the enough hook-up and braking power without being over bearing and tearing apart the track on a few years. protectors should be there unless you have the aftermarket cooler in the rear, then you have to fab your own.

 

[Tf18]

Studs

Do you have to have a special tool to cut the holes in the track or can you use a drill bit?

 

[sleddheadd]

Re: Studs

Do you have to have a special tool to cut the holes in the track or can you use a drill bit?

woody's makes a special bit , makes a real clean cut. i bought that from rich also.

 

[rx1ryda989]

Did any of u guys put extensions on your front heat exchangers?? Im worried when i ride my 1 1/4 rip saw rubs when i brake on the front heat exchanger.