nards444
Pro
Ok looking at covers and its states it fits certain sleds up to certain inches. Are they talking about the whole sled, or just the track or what.
I have a136 track warrior and a 121 track Viper. What size would I need.
I am not concerned with color or that it has a yamha logo or anything. These sleds go from shed to trailer to riding. Maybe sit out here and there.
http://www.amazon.com/WATERPROOF-TRAILE ... 351&sr=8-1
would these covers do.
I have a136 track warrior and a 121 track Viper. What size would I need.
I am not concerned with color or that it has a yamha logo or anything. These sleds go from shed to trailer to riding. Maybe sit out here and there.
http://www.amazon.com/WATERPROOF-TRAILE ... 351&sr=8-1
would these covers do.
trailhed1
Expert
I believe it is the overall length of sled.
Measure front bumper to rear bumper.
Measure front bumper to rear bumper.
Yes sled not the track length.
nards444
Pro
bottlerocket said:
thanks
yamascoot
Veteran
- Joined
- Feb 18, 2011
- Messages
- 33
- Reaction score
- 0
- Points
- 246
covers
If you intend to use an open trailer, you should buy the correct factory cover for that sled. Ive had more than one "universal" cover beat itself to death, rip to shreds and scratch the heck out of my sled. A few more bucks up front, but worth every penny.
If you intend to use an open trailer, you should buy the correct factory cover for that sled. Ive had more than one "universal" cover beat itself to death, rip to shreds and scratch the heck out of my sled. A few more bucks up front, but worth every penny.
yamascoot
Veteran
- Joined
- Feb 18, 2011
- Messages
- 33
- Reaction score
- 0
- Points
- 246
sled length
with a factory cover, the back of the sled may be covered differently from sled to sled. my 05 Rage and 05 warrior, the factory covers come back and wrap around the back of the seat, exhaust and taillights(if i remember correctly). The rear of the tunnel and track stick out from underneath. All the important pieces get covered though(hood, seat, windshield, etc.). Skis are not covered, but if they were, that creates a "balloon" area that will inflate and make the cover whip all over.
with a factory cover, the back of the sled may be covered differently from sled to sled. my 05 Rage and 05 warrior, the factory covers come back and wrap around the back of the seat, exhaust and taillights(if i remember correctly). The rear of the tunnel and track stick out from underneath. All the important pieces get covered though(hood, seat, windshield, etc.). Skis are not covered, but if they were, that creates a "balloon" area that will inflate and make the cover whip all over.
