Supertips are the bomb with Turbo

[Ted Jannetty]

I spent the day on Otis Resevior yesterday testing clutch parts on my Turbo Warrior

Supreme Tool and Machine makes the SuperTips clutch weights.

I had the Big Heavy Hitters Loaded with weight and they would not grab the belt, switched to the Supertips and YEEEEEEHAWWWW man does this thing rocket out of the hole and my clutch temps are cut in half.

Also tested some Dalton Helixs and WOW I made some big gains yesterday.

Got some new Vids will post them this week.

 

[Turbo Tim]

Ditto That .

 

[Freak]

Youve got me sold.

What angle Dalton you running? I had a straight 51 and I ate two clutches it was so agressive.

 

[Ted Jannetty]

Youve got me sold.

What angle Dalton you running? I had a straight 51 and I ate two clutches it was so agressive.

If it ate 2 clutches it was slipping real bad.

54-48

 

[Freak]

Youve got me sold.

What angle Dalton you running? I had a straight 51 and I ate two clutches it was so agressive.

If it ate 2 clutches it was slipping real bad.

54-48

Thats an understatment. One run and the clutch was smoked. I went to a multi angle like you and havent had any probs. Seems like that 51 would have been real fast though. Anyways I got the supertips and the billet carb covers on the way.

 

[muskrat]

weights

Ted
What boost/HP were you running?

MM

 

[Ted Jannetty]

Re: weights

Ted
What boost/HP were you running?

MM

12 psi boost.

 

[Freak]

Hey got my supertips in and wondering if anyone can throw out a starting point for loading these, maybe a little experience with loading diferent sections??? thanks

 

[Skydog]

TTT

 

[Buster696]

Ted, are you running the stock yami clutch with the ST's?

Thanks,
--Buster696--

 

[Skydog]

I think he is Buster696

 

[Turbo Tim]

Hey got my supertips in and wondering if anyone can throw out a starting point for loading these, maybe a little experience with loading diferent sections??? thanks

I've got 6 washers- heel ......4 washers middle ,........4 washers tip .....but that's on an Apex MCx.

 

[Skydog]

So it sounds like HH or ST need to load the heel.

Skydog

 

[Turbomania]

I stopped buy STM last Friday to pick up some caps and a couple of clutch kits. I got a chance to meet Mark, He has a nice place and they all seem like good people.
He has a nice RX-1 drag sled too.

 

[Ted Jannetty]

Ted, are you running the stock yami clutch with the ST's?

Thanks,
--Buster696--

Yes Sir, I am.

Base line starting point for a turbo sled will be 2 tungsten washers near the pin, 3 gold washers in the middle and 3 gold washers in the tip, and stager 3 on one side and 3 on the other for balance, got this info from Mark STM.