mmwildman
Veteran
what helix and spring? anyone?
Did you purchase the complete secondary or just the bolt
on kit and is this the first time using this type of system.
I'm wondering about how it works compared to the stock
Yamaha secondary for upshift & backshift ?
TB
on kit and is this the first time using this type of system.
I'm wondering about how it works compared to the stock
Yamaha secondary for upshift & backshift ?
TB
mmwildman
Veteran
Complete roller setup by TEAM, 1 year old, off my buddy's MM.
snowbeast
TY 4 Stroke God
- Joined
- Apr 13, 2003
- Messages
- 5,498
- Age
- 69
- Location
- E waterboro,maine
- Country
- USA
- Snowmobile
- 2015 apex xtx traded for a 2017 sidewinder L-tx-le
- yes
- YOUTUBE
- yes
Hey wildman is your rx1 shorty or mountain? Mine is shorty w/team 54/36 54/34 spring i will have to take apart cant remember right now, works sweet.
mmwildman
Veteran
Mtn, I run at 8500 ft. elevation and up. The helix I have is a 56/38 and 56/40. The clutch was on a MM last year. Was not all that happy with it. I have been told my helix was wrong. Trying another, straight 44. But I wondered what anyone else was running?
Gene
Gene
snowbeast
TY 4 Stroke God
- Joined
- Apr 13, 2003
- Messages
- 5,498
- Age
- 69
- Location
- E waterboro,maine
- Country
- USA
- Snowmobile
- 2015 apex xtx traded for a 2017 sidewinder L-tx-le
- yes
- YOUTUBE
- yes
yea wildman yours are to steep,shift to quick and hard at that elv. to hard to upshift,go to something like i am running,when team sold this to me,i was told to go w/your setup,cause yammi wanted rpms to ramp up slowly to 9800 thru 10,000 but i told them i wanted 10,300 thru 10,500 now and this is what i get,if i use hc weights,now i am going to try hh i bought off a friends rx1 that he sold,so i will need to retune it to those weights,but that is minor,if you use stock weights take some weight out of front tip rivet.
My RX-1 Works
Veteran
Team Clutch
I am running a Team Clutch with the new Red/Black spring and a 34/36 degree straight cut helix in the 34 position. I have tried 6 or 7 different helixes and this works the best in my machine. Geared 19/43 with 7tooth drivers. Read my reply on clutching. Just came back from a ride today, there was 2 feet of fresh and the uphill track speed was hoovering around 56 MPH. Bottom line is that big angles with the Team Clutch and the RX-1 don't mix!!
I am running a Team Clutch with the new Red/Black spring and a 34/36 degree straight cut helix in the 34 position. I have tried 6 or 7 different helixes and this works the best in my machine. Geared 19/43 with 7tooth drivers. Read my reply on clutching. Just came back from a ride today, there was 2 feet of fresh and the uphill track speed was hoovering around 56 MPH. Bottom line is that big angles with the Team Clutch and the RX-1 don't mix!!
