Axelqvist
Newbie
- Joined
- Jan 4, 2023
- Messages
- 18
- Age
- 41
- Location
- Lulea
- Country
- Sweden
- Snowmobile
- Sidewinder btx 153 -19
Hi
Got error code c1600 thumbwarmer is not working but handwarmers are hot.
Does anyone know the resistance of thumbwarmer?
Got error code c1600 thumbwarmer is not working but handwarmers are hot.
Does anyone know the resistance of thumbwarmer?
Turboflash
Lifetime Member
- Joined
- Mar 18, 2019
- Messages
- 2,508
- Location
- Southern MN
- Country
- USA
- Snowmobile
- '17 ZR9000 Ltd. 137 - PEFI Stage 4
Green/blue to green should be between 1.5 and 6.9 ohms.
Green/white to green should be 5.5 and 23 ohms.
Green/white to green should be 5.5 and 23 ohms.
Axelqvist
Newbie
- Joined
- Jan 4, 2023
- Messages
- 18
- Age
- 41
- Location
- Lulea
- Country
- Sweden
- Snowmobile
- Sidewinder btx 153 -19
There are only two wires to the thumbwarmer brown and black. Ohm reading between those two 568 ohms
stgdz
TY 4 Stroke Junkie
- Joined
- Mar 27, 2021
- Messages
- 661
- Age
- 46
- Location
- Buffalo MN
- Country
- USA
- Snowmobile
- 19 tcat, 15 4000 RR, 13 800 RR
It's dead
Had the same error last season at the end thank God. Roughly $100 to replace the assembly.
Had the same error last season at the end thank God. Roughly $100 to replace the assembly.
Axelqvist
Newbie
- Joined
- Jan 4, 2023
- Messages
- 18
- Age
- 41
- Location
- Lulea
- Country
- Sweden
- Snowmobile
- Sidewinder btx 153 -19
Ok, thanks
Turboflash
Lifetime Member
- Joined
- Mar 18, 2019
- Messages
- 2,508
- Location
- Southern MN
- Country
- USA
- Snowmobile
- '17 ZR9000 Ltd. 137 - PEFI Stage 4
Resistance I gave was left side switch pod. 1 set of wires for high, 1 set for low.
Similar threads
- Replies
- 2
- Views
- 808