buddah
Lifetime Member
- Joined
- Apr 14, 2003
- Messages
- 1,483
- Reaction score
- 284
- Points
- 1,288
- Location
- Wetmore, MI
- Country
- USA
- Snowmobile
- '17 Sidewinder B-TX LE
".........extra steering effort........" ????
Notice in the tagline about the Simmons skis? Even RX-1Yooper has switched off to mine and wondered why it turned so easy compared to his with the stockers.
Thanks............and glad you had such a good intro "up nort"
Notice in the tagline about the Simmons skis? Even RX-1Yooper has switched off to mine and wondered why it turned so easy compared to his with the stockers.
Thanks............and glad you had such a good intro "up nort"
grauser
Extreme
Welter, are you the guy that spins all the snow off the corners, like the frenchies in quebecs with no studs !!!
LeeKo
TY 4 Stroke Junkie
Buddah,
Have you decided if you are going to stud it? I couldn't figure out from this thread if the track with no studs is comparable or better than the 2003 studded track. I am going to try mine unstudded first because I don't have the time and don't feel like spending any more on sleds.
Have you decided if you are going to stud it? I couldn't figure out from this thread if the track with no studs is comparable or better than the 2003 studded track. I am going to try mine unstudded first because I don't have the time and don't feel like spending any more on sleds.
buddah
Lifetime Member
- Joined
- Apr 14, 2003
- Messages
- 1,483
- Reaction score
- 284
- Points
- 1,288
- Location
- Wetmore, MI
- Country
- USA
- Snowmobile
- '17 Sidewinder B-TX LE
LeeKo,
That's basically what I said. Run it unstudded first to see if it works O.K. If not, then spend the time ( & $$$$ ) and fix it.
Have a good one.
Buddah
That's basically what I said. Run it unstudded first to see if it works O.K. If not, then spend the time ( & $$$$ ) and fix it.
Have a good one.
Buddah
Gilbey
Expert
Jim, give me a call sometime for some riding. Left a message yesterday at your house.
Brad
(906) 789-7050
Brad
(906) 789-7050
buddah
Lifetime Member
- Joined
- Apr 14, 2003
- Messages
- 1,483
- Reaction score
- 284
- Points
- 1,288
- Location
- Wetmore, MI
- Country
- USA
- Snowmobile
- '17 Sidewinder B-TX LE
Brad,
Turns out we can't come up until Tuesday. :Babe: Mrs. Buddah had some emergency dental work (endodontic) done yesterday and she has to go Monday for follow-up. So......we drive Tuesday it looks like. I'll call once we're settled in.
Turns out we can't come up until Tuesday. :Babe: Mrs. Buddah had some emergency dental work (endodontic) done yesterday and she has to go Monday for follow-up. So......we drive Tuesday it looks like. I'll call once we're settled in.
chrishall
Pro
I have just bought the 05 RX-1 ER. I installed the 1.325" studs with backer plates that have a 45 degree bend on them that install up against the paddle for more support. I also used the tall nut to prevent the studs from bending. I installed 160 of them. Something like 48 double backers and 64 singles backers. Here is the website for the special backers.
http://www.woodystraction.com/catalog/8.category
Chris
http://www.woodystraction.com/catalog/8.category
Chris
