track question

[DAGE]

was out fishing yesterday and I had a chance to race my buddies SRX and another buddies RMK 700, beat em both but my track is toast, half of the right side has no paddles left on it, guess those missing paddles gave me the extra speed I needed to win.....

well I'm looking for a new track, I was thinking of going with 1 1/2" paddle, just need to know who makes one or if I'll have to buy a 2" paddle and get it shaved

thanks

Kyle

 

[yamrx1]

did your track paddles come off at once on this race or over time curious if i should be expecting the same

 

[DAGE]

I lost one paddle on the outter right side last year and I must've lost another this year, I know the paddle I lost last year took a nice chunk out of the track so I knew this day was coming, I was just hoping the track would've lasted another year

I didn't really get a chance to look at anything under the tunnel so I don't know if there's any damage, I do know that the rivets popped out of my rear heat exchanger and it's just being held there by the pipes, my rear tunnel extension is warped and I'm sure there's a couple other things that might've been damaged, pretty costly trip for 2 little saugers

Kyle

 

[dakine]

I have lost a number of paddles on my track as well. I took a piece of hyfax and used it as a guide to trim my track. The track was two inch,but after taking a utility razor to it ,the track is now aproximately an inch and five eighths.I noticed i gained about 10 mph faster topend.In addition the hyfax wear has been reduced because the track is closer to the snow. And a couple of pounds lost. iplan to put a 1.25 track on my mountain 03 rx-1