mtdream
TY 4 Stroke Master
might want to think of a 2 wheel inside rear kit...will off set some of the handling differences of 15 to 16...JMO
tapex_07
TY 4 Stroke Master
- Joined
- Feb 15, 2009
- Messages
- 1,160
- Reaction score
- 135
- Points
- 1,038
- Country
- USA
- Snowmobile
- '10 Nytro MTX SE IMPULSE 174x3
'14 Viper XTX SE MPI 159x14x1.25
'07 Apex RTX SC2 MPI 128x1
How tight is the clearence for the 16 wide? does it rub, alot?
hopewell64
Extreme
looking at going the same as some of you guys, CE 156x 16 x 2.5, only instead of moving to a big wheel kit i was thinking of moving the skid back about 2.5 inches to take up the slack and inprove the track angle, anyone done this? If so would i need to replace the rails to a more shallow angle.


swelly
Lifetime Member
- Joined
- Feb 2, 2009
- Messages
- 497
- Reaction score
- 0
- Points
- 821
- Location
- Anchorage/Seward, AK
- Website
- www.swelltimecharters.com
Make sure before you drill yhe holes, I think you only want to move back 1.5". Someone else chime in on this one please.
Similar threads
- Replies
- 3
- Views
- 1K
- Replies
- 15
- Views
- 3K