Turbo and Nitrous!

ottawa

Newbie
Joined
Feb 6, 2009
Messages
1
Reaction score
0
Points
151
I have a mc-xpress turbo kit installed on my rx1.I am going to install a nitrous pro fogger kit as well.Wondering if anyone has any tips,ideas.I'm running at 360hp at 22 psi,forged turbo wiesco pistons and was going to and the nitrous to gain horse power levels of about 500hp.
 
ottawa said:
I have a mc-xpress turbo kit installed on my rx1.I am going to install a nitrous pro fogger kit as well.Wondering if anyone has any tips,ideas.I'm running at 360hp at 22 psi,forged turbo wiesco pistons and was going to and the nitrous to gain horse power levels of about 500hp.

You better consider building a motor first, or you will end up with a pile of scrap metal.

A stock engine block can not contain that much power.

I would suggest you contact Hurracane for one of his blocks.
 
Gotta go with Ted on this one. I just built up a Hurricane block last night with Carillo rods and JE pistons. The stock components look pretty frail compared to his workmanship. 20+ with nitrous is serious power, and it requires serious engine preparation.
 


Back
Top