Mtnviper
Vendor
I have been building a few ROV kits equipped with the Arctic Cat magnetic tether switch for a couple of years now with excellent results! They work so well that I've decided to add them to the line up. Basically it's a $30 option to cover the cost difference of the mag tether switch and related wiring and they are available on Viper/7000, Sidewinder/King Cat and premium M1100T ROV kits.
I may make them available for Nytros and Phazers in the future as well, but need to verify fitment due to the magnetic tether switch being physically larger.
Bill
I may make them available for Nytros and Phazers in the future as well, but need to verify fitment due to the magnetic tether switch being physically larger.
Bill
Attachments
Rwooly
Newbie
- Joined
- Dec 7, 2008
- Messages
- 1
Where do I order the kit?
Mtnviper
Vendor
Emmustwheel
Newbie
- Joined
- Sep 16, 2018
- Messages
- 13
- Age
- 41
- Location
- Tacoma wa
- Country
- USA
- Snowmobile
- 2015 SR Viper 180MPI, 2006 apex
Already have your roll over kit, but its the older style switch.
Do you offer an upgrade/plug and play option for the magnetic style?
Do you offer an upgrade/plug and play option for the magnetic style?
Mtnviper
Vendor
Sure, I can fabricate a short pigtail harness which would allow for the mag tether conversion. I see in your signature that you have a Nytro and Apex. The Cat Magnetic tether switches are noticeably larger on bottom side, I haven't had a chance to test fit to see if there is room for the switch on a Nytro yet.
Attached are a couple of pics of the mag tether for reference.
Bill
Attached are a couple of pics of the mag tether for reference.
Bill
Attachments
Emmustwheel
Newbie
- Joined
- Sep 16, 2018
- Messages
- 13
- Age
- 41
- Location
- Tacoma wa
- Country
- USA
- Snowmobile
- 2015 SR Viper 180MPI, 2006 apex
I will have to look and see if there is enough room.
Actually going on a 2015 SR Viper, updating my profile.....
Actually going on a 2015 SR Viper, updating my profile.....
