MountainMax
Expert
- Joined
- Nov 21, 2004
- Messages
- 297
- Reaction score
- 0
- Points
- 741
- Location
- Churchill Falls, Labrador
- Country
- Canada
- Snowmobile
- 2009 Yamaha Apex
My buddy has an 09 venture with the FI 1050 motor and his secondary spring broke, I have a new one here to put on for him but don't know the stock setting and he don't have the manual and I can't fin dit on the tech page here or under search. I was going to use 60 degrees but thought I would check here first, any suggestions? sled is 100% stock. and has the white marked stock spring.
agaguk
Extreme
Should be a pink marked wrapped at 60* unless is a tf version with 151" skid.
MountainMax
Expert
- Joined
- Nov 21, 2004
- Messages
- 297
- Reaction score
- 0
- Points
- 741
- Location
- Churchill Falls, Labrador
- Country
- Canada
- Snowmobile
- 2009 Yamaha Apex
Yeah, it's the tf, and the old spring and new one both have the white paint mark on them, is 60 degrees still ok? or shold I go to 70?
agaguk
Extreme
I dont know the spec for a tf could you tell us what is the degree of the helix cam? is it 41* or 43*? at least tell us the part number on the helix.
