Noel Lehane
Newbie
- Joined
- Jul 17, 2021
- Messages
- 1
- Reaction score
- 0
- Points
- 31
- Location
- Bayfield Ontario
- Country
- Canada
- Snowmobile
- 2013 Yamaha Apex SE
Has anyone fitted Slim Jim 2.0 Carbides?
I have a 2011 SE with the Tuner skis & I want to switch to Slim Jims. Also what skis would I need for this.
I have a 2011 SE with the Tuner skis & I want to switch to Slim Jims. Also what skis would I need for this.
- Joined
- Jun 1, 2004
- Messages
- 7,866
- Reaction score
- 2,053
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
my stock 2011 apex skis where pretty good with good carbides other than they did not float very well. my 11 came with single keel ski. my 16 came with tuners and 3 rips across a meadow i was ready to toss them through a wall. put them on a 97 sx700 and guy loves them.
if going aftermarket, curve xs is pretty popular with the carbides you mentioned. i have run curves on my 11 before and i am looking out for a deal on another set to go on it again.
if going aftermarket, curve xs is pretty popular with the carbides you mentioned. i have run curves on my 11 before and i am looking out for a deal on another set to go on it again.
- Joined
- Apr 13, 2003
- Messages
- 21,731
- Reaction score
- 9,324
- Points
- 2,103
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
You could just get stock single keel take offs and toss them on. I have run the on curves with great success.
