Would the Nytro rear skid bolt into a Apex?

[switchback1080]

exploring some options here....I would like to stretch my apex out since I have 0-Traction. Does the Nytro 144" skid by chance bolt into a apex?? or with minor work?? would it make sense to consider doing that or is there not a good weight transfer in that skid? Im running the mcx 19T kit. What other options are out there??

 

[grader]

just about any skid will bolt into just about any sled if the measurements are correct. the doner sled measurements are the important ones and must be transfered to the new sled. use the bottom of tunnel protectors in the apex as the tunnel. all other shaft setbacks must be used as well as mounting plates for strength. i think that skid would work great in an apex.

 

[ahicks]

If you are going to do a skid conversion, there's not much point in limiting your choices to just one or another. About any of the commonly available skids will work without a lot of difference in time/effort. Go for one you know/like the best!

 

[FLYBYU]

great another project. time to tap the rockies again?LOL

 

[big_red1a]

There is a new m10 with air shocks out i saw it in american snowmobiler mag (feb)

 

[switchback1080]

great another project. time to tap the rockies again?LOL

ohhh you got it! just looking into a few things for the spring.