xtx gonna fit?

Turk

Tech Advisor
Joined
Apr 14, 2003
Messages
3,474
Reaction score
16
Points
1,068
Location
western manitoba
Troops
Is an XTX gonna fit in my 10' triton aluminum enclosed? I know my Attak was a tight fit. I don,t want to buy a new trailor to fit this sled.
 
Turk said:
Troops
Is an XTX gonna fit in my 10' triton aluminum enclosed? I know my Attak was a tight fit. I don,t want to buy a new trailor to fit this sled.


Probably not Mike, but you can ride with me this way I've got the BEST CLUTCH GUY in all of Canada with me at all times :-o
 
turk, 136" rev gade barely fits in a ten footer (enclosed), very doubtfull on a 144 in tunnel fitting there. ski
 
It should fit if it has a front top cap that extends for the skis. The Yamaha rep at the demo ride pulled up with an XTX in a 10 clam shell type trailer.
 
I believe it will depend on your cap. If it is a triton top, it might fit. If it is like the top I had once on my 10 foot triton (top not made by triton) it would not have been able to go far enough forward without hitting the hood/air box cover on the inside of the top.

I moved west and had to buy a 12 footer, because I ended up with an FXNytro MTX and a Phazer MTX. Even the 144" Phazer wasn't going to fit in my 10 foot trailer.

I would think that if that was the deal breaker, you could convince your dealer to find an XTX to load in your trailer. Maybe at a sneak peak event, or something. A demo ride near you......???

Just a thought.
 
I put my cousins 144 Switchback in my 10', but it was tight and I couldnt open it from the front because the ski's were over the front angle.
 


Back
Top