BombaPolaYama
TY 4 Stroke Master
Anyone try this style bumper on a RS Venture GT or TF?
If so, did it fit okay? I'm asking because on Yamaha Canada's website it is only listed for the Apex but Port Yamaha shows it as fitting the RS Venture models as well.
http://yamaha-motor.ca/products/details ... item=4869&
If so, did it fit okay? I'm asking because on Yamaha Canada's website it is only listed for the Apex but Port Yamaha shows it as fitting the RS Venture models as well.
http://yamaha-motor.ca/products/details ... item=4869&
radianguy
TY 4 Stroke God
- Joined
- Jan 1, 2007
- Messages
- 1,939
- Reaction score
- 103
- Points
- 1,058
- Location
- Corner Brook Newfoundland, Canada
- Country
- Canada
- Snowmobile
- 2009 Yamaha FX NYTRO XTX 1.75
unless Yamaha updated the bumpers I wouldn't waste your money on it! I had one on my Nytro and literally ripped it in half when I tried to lift my sled by it. the bumper itself was plenty strong but where it attached to the mount was paper thin.
Ican tell you on an apex, it uses stock mounting location/bollt, and the bumper is beefy. So it is mounted as stong as stock, with a stronger actual bumper
radianguy
TY 4 Stroke God
- Joined
- Jan 1, 2007
- Messages
- 1,939
- Reaction score
- 103
- Points
- 1,058
- Location
- Corner Brook Newfoundland, Canada
- Country
- Canada
- Snowmobile
- 2009 Yamaha FX NYTRO XTX 1.75
The Apex/Vector bumper might be different...look at the 2 small tubes where the bumper makes on to the mount, that is where I ripped mine, the metal was like a pop can there.
Handy
Expert
- Joined
- May 12, 2005
- Messages
- 374
- Reaction score
- 58
- Points
- 908
- Location
- Anola Manitoba
- Country
- Canada
- Snowmobile
- 1983 Bravo, 1988 XLV, 1991 Pazer II, 2005 Vector, 2006 Apex Super Charged, 2017 Viper STX DX 137, 2018 SR Venture DX
If it fits an Apex it will fit any RS or RX chassis. Do not compare 08 and up Nytro to RX or RS as they are completely different.
BombaPolaYama
TY 4 Stroke Master
Thanks for the replies - I have checked the part #'s for recent model year Vectors, Ventures and Apexes and they are all the same - even the older RS Venture has the same bumper.
SounderMN
Pro
- Joined
- Sep 26, 2011
- Messages
- 173
- Reaction score
- 22
- Points
- 428
- Location
- Minneapolis, MN
- Country
- USA
- Snowmobile
- 2015 Yamaha Viper LTX DX
radianguy said:The Apex/Vector bumper might be different...look at the 2 small tubes where the bumper makes on to the mount, that is where I ripped mine, the metal was like a pop can there.
This is very true. However I think it is intended to be that way so if you hit something it acts like a crumple zone to reduce the impact. I think it helps prevent more damage to the frame. Don't ask,how I know this... Lol
radianguy
TY 4 Stroke God
- Joined
- Jan 1, 2007
- Messages
- 1,939
- Reaction score
- 103
- Points
- 1,058
- Location
- Corner Brook Newfoundland, Canada
- Country
- Canada
- Snowmobile
- 2009 Yamaha FX NYTRO XTX 1.75
I know they are completely different chassis, I have one of each. Did you even read my post?Handy said:If it fits an Apex it will fit any RS or RX chassis. Do not compare 08 and up Nytro to RX or RS as they are completely different.
BombaPolaYama
TY 4 Stroke Master
Similar threads
- Replies
- 4
- Views
- 1K
- Replies
- 2
- Views
- 2K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.