Recent content by 2stroken

Is the CR9EIX a good plug for a phazer?

Thanks, I am hoping I can see the later model and the older model side by side inside the splines. Not visualizing it very well.

Details on measuring the spline depth?

I purchased it from Ebay, it said 1996

Is this the correct clutch that doesnt require the modifications?

LOL, yea I guess that would help. Basically it doesn't go in to reverse unless I get off of the sled and pull it backwards. I have 2 other sleds and they go into reverse perfectly(08 phazer, 07 venture lite). Idle is around 1600ish, have loosened the chain tensioner. As I mentioned it worked...

I was doing some searches, and curious if any new reverse issues. I think it boils down to I have the wrong belt, as I blew a belt a few years back and since then reverse has been a struggle. Should I do a new belt, or do the shim? What is the updated belt number?

Is number 8 the circlip to be replaced? Thought I had read somewhere that it needs to be replaced.

part number for the shim? Video of the change?

Seems like my reverse is getting worse on my 07 phazer. Before usually could just rock it and get it to engage, lately been worse and worse. I have done a few things. 1. Idle is around 1800 2. I have put a little more slack in the chaincase 3. I have updated the grommet for the reverse Is...

Where did you find that, I have been looking on and off for another one. The oil filter change interval is 5000 miles. I changed all of mine at once and none of them were all under 4000 miles. If you decide to let go of it, or run across another let me know. I think the only bad thing about...

That was the solid state relay I was thinking of. Thanks!

All thanks for the info, really curious if there was a solid state one or another upgrade.

Yes, it seems I turn the key, hear a click, then about a second later the starter engages. I suppose it could be a weak battery/connection that doesn't pull the relay in fast/hard enough. I haven't done in any troubleshooting figured I would put a meter to it, but was just doing some looking...

Went to start the sleds for the year, hit the key and there is a delay before start engages. Sled fires up, I was thinking there was a known issue with the starter relays. Was there a solid state relay that was being used as a replacement?