Search results

Tore mine apart tonight and going to replace TPS and sync throttle bodies, 3 2 strokers done and now the 4, wish it was as simple as those 2 strokers!

Musselman, did you bother to replace the cam position sensor, or pressure sensor when all apart? I would like to narrow down the easier fixes 1st since my sled is doing the same as yours. I plan on replacing the TPS since it was known to be bad.

Noticed your odometer @ almost 25K! Is that in miles or kilometers

Thanks musselman for all the research, my sled 07 Attak was doing the same exact thing end of last year. I am leaning at the valve adjustment from the dealer and hopefully be corrected. Post back when you get your problem resolved!

Will be having that done at end of winter, completed CO adjustment and idle. Runs great now but still has a little stumble when cold, but better than before.

Find myself doing more off trail and breaking trail nowdays. But I do like the tipped up rails for the trails. Just wondering if Yamaha will send the shock update for the 16's as well?

What w0uld you go with 2016 XTX with 1.75 track or 14 XTX with tipped up rails? 2014 is $1800 cheaper. Haven't heard good things on 16 rear suspension but like the 1.75 track option. Would 1.75 back country work on the 14?

Question: Unplug while not running with key on or running? Just starting to put back together. Thanks

I just damn hope the bulkhead isn't worn out of spec! Don't know what the fix would be other than replacing!! Didn't think it was the oilite bushings, ordered 2 bolts and see where that goes. I did put the new stock bushings on bolt and there was free play in between.

Installed kit about 4 years ago or 1800 miles and noticed the right front upper a-arm had play. Removed and bushings seem ok went to dealer to pick up stock ones just in case and after further review I have a slight wear on the threaded end of bolt probably from originals going bad. I am going...

Idle is right in spec when warm 1500, after doing more looking I am going to verify my CO settings since I do have the Ulmer air box mod and honestly cannot remember if I adjusted once installed. Funny thing is that it ran fine for 4 years after air box mod and now is stalling. Also going to try...

Hope its not the valve adjustment, manual calls for every 25k!

Think to try pressure sensor before looking into CO adjustment? My search seemed to come up with a lot of different fixes to the same issue??

Yes, changed plugs back o stock about 1500k ago. Just started acting up this year. new battery last year too higher CA and needs 4 turns to get going and she barely keeps running. but once warm it idles fine, a few stutters here and there, but the stalling still happens. Have it torn down now...

Just had my 1st trip and noticed my 07 Attak with 5800 miles is starting harder and when she starts idle is very low to almost stalling. After riding the first 10-15 min. when coming to a stop it stalls. Turn key off and it starts right back up. It also cuts out when getting on throttle in the...

I know I like to bring back the dead! BTW what is the BoP kit?

I just disposed of my cable for the 4th time for good! They only last a year even with the factory update (which was more zip ties) I turned my shock 180 degrees and can adjust with #1 square head screwdriver. To be honest I have only adjusted my rebound maybe twice a year.

Almost done rebuilding skid on my 07 Attak new hygear shock revalve all around and spring kit and went with the duponts and Excel wheels but am a little worried now that I hear they may crack the rails due to increased pressure. I am studded but only on the center of track. Most of my riding is...

Is there anybody in there???

Time to change my skis and currently running Slydog Powderhounds with shaper 6" carbides. These skis dart like there's no tomorrow, instead of going back to stock (heavier) skis and dual runner carbides. I see that Kimpex Arrow skis and the new Yamaha Dual runner's are very similiar, any...