Search results

How old was the gas in it? My Phazer always requires Premium FRESH gas to run best. I bet a plug fouled.

I would be checking all ground connections and junctions. You either have wiring or battery issues. Sucks to diagnose takes time for sure. Good luck

Just measure extended and compressed lengths of each

You sound way more qualified to figure this out electronically than me. I will give you all the assistance I can. We need to talk perhaps with my parts and your knowledge of electronics we can beat this system! Thank you! Pm me your address I will send a known working Servo.

Yeah like you said on Qs3 and Qs3r the valve is just a rotating cylinder with a big hole for 1 a smaller hole for 2 and no hole for 3. On IQs it’s a needle valve with infinite range but limited by the system. I could possibly modify the valve itself by changing needle depth like a carb or hole...

I am bringing sleds! This is today.

There is no way possible to effect the ratio of 1-2-3 except to modify the valve itself and that’s only possible on Qs3 and Qs3r. Iqs is a stepper motor CanBus controlled. Nobody is modifying them yet. With 3 steps any shock Valving on either will make either position 1 or 3 unusable without...

That’s not revalving that is by modifying the adjuster.

The SD 12 is for pickup coil not stator so should just concentrate on that to eliminate testing everything. I could be wrong but every single time I have ever seen the code whether on a j code or Yamacat it was in fact the pickup sensor. Also 90% of time it failed after a great trouble free ride...

I am going. If my wife doesn't go I am looking for someone to split the room. Will be fun either way. Can we ride ATV on trails?

No. The IQS imitates the QS3 Mechanical valve which 2 is 20% stiffer than 1 and 3 is 50% stiffer than 1. So changing the valving of shock still leaves the 20 and 50% difference between 1,2 and 3. IQS could be modified with programming to change that ratio to whatever you want. QS3 valve itself...

Probably is. Its 2024 so would be in the 24 Tech Update book

Ok OFT is out of business and I need another decent Stem Clamp/Block for the 7000. Who makes a decent one? Aluminum with a bushing.

Guys its simple as we age our minds just are too full of knowledge so some has to go if new is to be retained. Thats also a problem since we all like to retain everything. Thank god for TY. A big Notepad!

Also just leaving message is not enough keep calling till you get someone.

Probably a spun reluctor wheel on stubshaft. Would match all symptoms

Definitely he replaced a power supply I broke wire on and it was my fault I swung whole goggle pouch full of crap from the poor wire. I had just mentioned it to him never even paid yet! I definitely will. Just call or write him. No worries.

Over torquing the taper lock on wobble bearing leads to most failures I believe.

Too old for that when trail riding. Just on river or racing

Mine has never backfired. I think it was the deep snow workout and silencer was hot and maybe snow hit it? More than likely its just junk