Search results

I plan on testing the pb-80 on saturday. I wont be able to run it on the timers but I will kind of be able to see how it compares to the yammie clutch. I will be trying a couple different setups to see if I can get the pb-80 to somewhat run cool. I know on the 1200 doo it ran hot but it didn't...

I had the same issue and there was water in one of the tubes to the sensor which most likely froze because it was about -10 out. I am just wondering if some people having trouble have vents in to help clutch cool. I have a ton of vents for clutch cooling and the dealer said it is very possible...

I have one that I picked up from wowchad. Still trying to get the yamaha primary dialed in. Finally got snow in southern WI. Hopefully will get some running time on it by next weekend. I did put it on for a little bit on the grass and it pretty quiet compared to the yamy primary. As soon as I...

Got a 17 winder stock tune and was looking for better backshift and throttle response. I was just wondering if the dalton arctic cat white secondary spring set at a little lower wrap would provide me with improvement. I would most likely run the straight 35 or a 37/35 with it. In the front I...

Thanks for the reply. Yes I have alot more testing to do to if we get snow. Also I seen that your using the td guage. I went on there site and this would be alot bettter than timers because you could go right on a hard packed trail and test go and make changes and test again without setting up...

No spring bind that I can see. A little rubbing on the side but no more than the dalton primarys I tried. I do have the glide washers installed. Crossfire if I went that light of weight to get 8800 pretty much right away there was lots of primary heat. Also the 35/39 helix was about 3/4 sled...

No snow here in southeastern wisconsin and we are heading to northern wisconsin on wednesday, Brand new 2017 rtx le and needed to get some testing done to get it close. I only ran 540 ft on grass but did get it dialed in pretty good hopefully. Timers were set at 240 ft and 540 ft. Best setup...

I have a stock sidewinder just wondering if anybody has a initial weight setup for the qay 66 with black/orange dalton secondary spring the black/green dalton primary spring and the stock 35 helix. We have no snow down in southern wi to test on and will be heading to northern wi in 3 weeks just...

I am by far no expert but I have testing and tuning clutching for 20 plus years. And to gain 16 mph in a mere 660 ft with just a clutch kit nothing else in my opinion is not possible unless there something totally wrong with the stock setup. Just my opinion.

Has anybody vented the exhaust side of the sidewinder like you do on the clutch side or does to much air flow on that side create a problem, Thanks Kurt

Just bought 2017 and is very smooth and quiet. Owned 2007 attak and the clutch did rattle a bit but in no way bothered me in the least. Every sled has certain noises track clutch, exhaust just ride and be happy. I have owned all four brands and more during 50 years of snowmobiling and I can tell...

Just picked up leftover 2017 winder and got the oppurtunity to ride it for 5 miles last sunday and it was awsome. I had a 1200 xr with alot of upgrades and up untill I rode the winder it was the best sled I have owned. The new winder was so smooth and fast sneaky fast it was awsome. I was out in...

It's brand new only 5 miles on it. I don't know if you call it turbo lag but the first 80 ft or so it seems lazy then kicks in. My 1200 comes out of hole full power. The winder takes off right away but at about 80 ft the skis come off and its gone. It does not have the holeshot I get with my...

Picked up leftover 17 sidewinder for a ride tonight we had 5 inches of snow in southern wi. I have a 2013 1200 xr right now and all I can say is wow!!!. This thing is unbelievable. My 1200 was not stock it had alot of mods. This sidewinder would leave it behind after about 100 ft. One thing I...

2007 attak had the starter not work a few times on our last trip. Turn the key and would just click. Took a wrench on the primary and turned it a little and then hit the key and it turned right over. It did this about six times in three days. Its not the battery we tried jumping it and it still...

drag n fly Just go to a hardware store and get 1/2 inch set screw. Just weighed one and weighs 1.9 grams which would give you about a 2 gram weight reduction. Kurt

05 vector Yes it does have an aftermarket exhaust. Its got hauck exhaust.

A friend of mine has a 05 vector we just got back from the up. The engine misses under throttle. Once in a while it will run clean for a few seconds but hardly ever. We ran sea foam thru it and did not seem to help. It starts good and idles good. We also put in three new plugs and did not help...

super rats Now that I got my best setup with the dnf next year I plan on trying the super rats. My question is, is there adjustability to lower the rpms just on top end. The way it sounds you add a bigger roller to lower rpms but this would lower rpms all thru the shift. Say your pulling...

drag n fly The engagement with the black spring was about 3800 rpms but was pretty smooth. It did shoot out of the hole unbelievable. Best holeshot setup to date. The 110-111 mph was on the speedometer. The track was a trail which was a good hardpack temp was 23 degrees and not exactly sure on...