Search results

How did you touch the bolt without messing up the thread? Thanks, Ned

Thanks again.

Thanks

Do you know what size I would put on?

Hello, Was just out on the lake with my 2016 VK and my buddy stopped me and said my front Idler wheels were not spinning on either side. I just had dealer install Dupont slides and was wondering if that might be the reason. The two front Idler wheels on both sides are not making contact with...

Thank you.

Is it common to have the heated under seat storage on a 2016 VK Pro to sweat any build up moisture to the extent spare gloves and hat get soaked? Thanks for your input.

Hello, Where would I find the SB quiet clutch kit. I hate the noise on my 2016 VK.

I am with you but I actually had fuel leaking inside the engine compartment on the left side below the clutches. I am thinking the vent line maybe came off or maybe a hole in the vent line. I looked for something obvious but could not see anything specifically. Dealer is going to take a look...

Hey thanks.

With my sled it lasted about 1200 km before I could hear the rattle at slow speeds and now it can be heard at idle and up to 50-60 km. My dealer told me they just did the loctite/permatex on the stub shaft and nothing else. I will be taking my sled into the dealer in the next week for its annual...

I had the dealer do the loctite on my stub shaft and noise was 100 percent gone.. they let it cure for several weeks....problem is that it only lasted 1200 km and the noise is back as bad as ever on my 1049 cc vk

Hey perhaps I missed it but did you describe your fix with photos yet. My apologies if you have and I missed it. Thanks, Ned

Thanks

Not sure if this is any help but I have a 2016 VK Pro that has same engine as the vector. This winter I was filling fuel tank and noticed fuel pouring out of the engine compartment on the clutch side of the machine. I assumed the fuel was siphoning out the overflow but not positive what...

Yes I too smell gas on my machine. Normally it is when I am on rough or bumpy trails going slow. On one occasion I had gas pour out down into the bottom of the clutch area upon fill up. I would suspect the gas came out the overflow but cannot understand why the overflow would allow gas to...

I contacted Yamaha customer service regarding the noise rattle of my VK Pro 1049 cc clutch. Dealer put Permetex on stub shaft and let it cure for few weeks this past summer. When I picked the sled in the fall of 2017 up it was super quiet and was a dream to drive for about 1200 km. Just...

I hope your wrong. I am not prepared to live with it and if I cannot get rid of the noise I will have to drive a different brand which is brutal because I do like my VK but not willing to drive a rattle box. Sure hope Yamaha is listening!!