Search results

My 08 apex quit charging I drove back to my shop did a volt test it was below twelve volts and the pink wire was like rely hot. And I had a good rectifier from a apex doner sled. I installed it and started it, checked voltage was like 13.7 life was good for about a half hr max then the low...

Are there any members here that installed a Fuel Tech system in their Apex motors I could use some help with mine LOL

I want to move my turbo return oil line fom the timing check port to the center larger port in the stator cover and tap a An port into it . But I really dont want touse the nylon stock plug, does anyone here know of a after merket billet aluminum plug . I tried a YFZ450 but its to small

When adding a head shim is it necessary to slot out the cam gear and how much to slot out

Gauge doing this the tank full and yellow light is flashing

What modifications are needed to install these ID 1050 injectors on my Apex motor they gave me new clipsAnd pins any input would be appreciated

I have a 2008 Apex motor with a GT2860 and am installing a adjustable regulator a Summit brand . My question is hooking up the variable rate sending line . Do I extend the line from the OEM regulator to the Adjustable reg or is there the better way . Thanx any input would be great

the statice light is flashing red and when I check the error code it's a #77 any one know what that is

I have a 08 Apex with a GT2860 turbo with PCV auto tune and a POD screen. it's not in a sled but a off road buggy The last time I ran it was last summer in St Anthony ID about 5000 ft above sea lev for a week and it ran about perfect . At the low AFR was about mid to upper 12s mid was high 11s...

I have a 08 Apex with a GT2860 intercooled and running about 10lbs boost in a Off road car . Last fall runnin the corn fields in noticed dust was colecting around the motor but I didnt think too much of it . The last two weeks I have been riding down in Cali in Glamis sand dunes , the motor ran...

My signal wire tore from the second from end port in the rear of my PCV . I turned the set screw back and tryied to fish it out W/air and a small wire . But no luck . Can the back cover be removed to access the conector. Any help would be app much

I have a 2008 apex with gt2860rs and I have been running the stock fuel rail reg . The problem I been having is when I it builds boost it leans out and the last time runnin it I basicly had to loosen the waste gate to run it home with no more than 2 ta 3lbs of boost and then it would not rev...

This pict is off my buds clutch not an Apex but Ive been letting him use my spare for my Apex the past three winters and he called me on sunday and said the same thing happend to the primary I loaned him :o| WTF ? Any Ideas .. I was lookin around on Ebay on sunday and saw at least three...

I have the PCV with the AutoTune &LCD screen on my 08 Apex motor . Now I have had the PCV & AutoTune for two years now this spring I put a Turbo on and added the LCD screen . The prob I am having is after about 13hrs of run time ya start it up and every thing is blank|. I had to recalabrate the...

I was wonderin what yu turbo Apex guys are using for your breathers , now my Apex motor is not in a sled and I run in 90 plus temps . On my last trip when I would run over 10 lbs of boost climbing the big dunes I would get a shot of oil out the breather filter . Any input would be great Thanx

When pumbing in a SYNAPSE BOV what install orientation are being used for an Apex push or pull

I was wonderin what would be a good after market pump like Walbro and witch one any of you are using

Hi I have a 08 Apex and am wanting to use a after market fuel pump and I was wonderin what the stock PSI was Thanx for any help :Rod