Search results

hey guys i got a 2012 apex xtx with mcx turbo and is hard to start lately it take like 4 times for sled to start it starts stalls and maybee on 4th 5 th try it stays running and when its idling seema to-have a missfire on cylinder 2 and sometimes #1 and when i go to give it some throttle it...

hi guys i have a 2012 apex xtx turbo wich i think there may be a switched injector plug in juatcwondering iff someone had a picture or a wiring diagram as to wich plug in goes to wich injector wich colour wires to each injector

Does anyone have pictures of vaccum line routing for 2012 and up apex 290 mcx kit there is 2 small extra nipple in 2-3 throttle body does that all get "t" in to the rest

Hey guys I purchased a 3 wheel offset axle from tricked toys and I'm running 3 9.5 inch proline wheels the issue I. Having is trying g to get the outter wheels aligned on tracked I had it perfect on the stand then took it out and bang right out to lunch again the problem is with the outter...

Hey guys I'm in the middle of building a sidewinder motor with rods and pistons but customer wants all bearing changed for rods wich I can't find any colours on old bearings but iff I do it as per manual I found my colours but when I do it for main bearing wich I still see colours what the...

Hey guys I am looking at possibly getting some port work done on my sidewinder I have different cams in a little bigger turbo but my question for you guys is porting worth doin and what kind of power gains would be seen iff anyone has done this to there 998 please let me know iff there was a...

Hey guys I just recently put my apex motor together after building with carillo Ross and pistons and all new main and rod bearings and oil pump problem is when I put the cams in and time the motor when I turn it over by hand there is a popping noise like a valve sticking then coming loose or a...

Hey guys I have put the stage 6 in my sidewinder does anyone run the stage 6 and were do u fling the sweet spot to be for rpms and weight set up thanx

Hey guys wich belt fo I ha e to run with the 11.25 stm secondary and stock 8.25 primary does anyone run this combo

Hey guys I had put a set of cams in my sled install all went good machine fired up this was about 1 month ago sled ran good today I went to fire it up battery was dead charged it then went to fire sled it started but stalled then would not start just flood the motor so I decided that possibly...

Anyone k ow who make the spider removal took I have to split my primary to change outer shieve hur don't know who makes the tool

I'm gonna be replacing cranck in my 2008 apex would anyone happen to know the clearances for main bearings and also rod bearings sled will be using carillo rods

Hey everyone I'm in the middle of doin a dimming chain swap to a heavy duty chain What s the best way to remove the oil pump chain to get the timing chain off

Hey guys what is the best easiest way to get the cam chain tensioner out on these winders

Hey guys I'm looking at possibly putting some td cams with the header anyone who is running them and has them I would just like to know the benefits and gains to be had I ride trail and do lots of radar running

Hey guys I was out yesterday testing my sled and when I got on the throttle it was like it hit rev limiter then all the sudden it was like the belt was slipping and wasn't pulling and just reving so I pulled it apart today after reading about the top gear and the top gear felt abit loose on the...

Hey guys I'm new to the sidewinders I have no idea were to start for clutching I do mainly ice speed runs and odd trail ride here and there I have turbo dynamics full tune bundle but run mainly max spool 17 and race tune I ordered stm 60y weight but abit lost as to what to run for springs and...

Hey guys I just have a few questions on my 290 Mcx apex I recently purchased a primary with overdrive cut into it just wondering off this will have any affect on gearing or clutching and also belt life I am running radar runs 1320ft I run 25/38 gearing I ran 128.2 I 1320 with my stock clutches...

Hi guy im looking at sending my gen 2 mcx box to get flashed to 315 kit i took the box off and this is what it looked like

Hey guys i have a 290 mcx rear mount apex im teying to figure out clutching for 1320ft radar runs curently running supertips at 77 grams with a w-w-w primary with a 45-39 helix with pink spring with stock gearing it dosent seem to be pulling that great and im at about 10 600 rpms anyone have a...