Search results

Now that Pioneer is closed is there another company to get the kit from to eleviate the slider wear on my Attak ? Or are oversize wheels the only way to remedy the problem ?

Dude I live on the other side of the state. Great offer and would love to take you up on the wrench'n / drink'n. I will see what I can do this year, may ride over that way if the conditions get good.

With the damage they do use everything at your disposal it will save you much $$. I use all the above mentioned methods along with several empty hand cleaner tubs filled with ammonia. There is not a critter that can take the smell of the stuff. They avoid the area at all cause. Works for Bats in...

Did you move on the manual ? I will pay what you need to ship it to 49337 Michigan. Let me know. Pat

I have a problem with the shift shaft, seems someone never tightened the keeper bolt and the key-way has worn the shaft. I have a donor motor that has a good shaft but have never been through the splitting of the cases to swap the parts. Can someone help me through the process that is close to...

16" Track Fit ? Not sure this got resolved. Will the 136 x 16 track fit ? It is a 136 x 16 x 1.25 and is a 2.52 pitch. I am sure there is 1/2 clearance on the sides of the tunnel on my attak. Please chime in if you know.

Not going on the demo ride but rode munising last week/wknd. the trails are still good considering the 50 degree temps. gran marais was all in good shape with the exception of getting into Seney and the 10-20 miles east of shingleton looks like a MOTOX track. Lots of puddle jumpin and definitely...

I can turn the adjuster screw and nothing ! Have not discombuberated the assembly yet and wondering if anyone else has had this problem with the Attak headlight. Thanks

Is there a torque limiter for the apex motor ? I think the motor torquing is causing the Y pipes to flex and eventually wearing out the flange. I have three of the four pipe flanges worn off on the top, the farthest right is the worst. The left side is fine. Thanks in advance.

ODO Off WE ran over 300 miles last weekend, two Vmax 700's one 08 Phazer and my Attak. The 700's showed 340 miles the Phazer showed 320 and I showed 275. There is definetly something going on with the ODO. Now I do not attempt to spin the track at all, I know it does a little but that is a huge...

Attak I hated the stock setup on my attak so this year I started to change things. I loosened the front shock springs where I can push up on them when it is sitting on the ground. Pulled the limiter strap up two holes, set the transfer rod at minimum transfer. I did install a Big Boy spring and...

Well we rode last weekend in 26 Deg weather and my 06 attak warmers were as warm as his. My hands froze for the first 7 miles and then I could feel the heat. Phazer warmers were marginal at best. Hyfax are shot after the weekend also. We will keep plugg'n away until we get it. I found the Phazer...

Seems the 08's have more issues then the 07's? Still cold hands. as for the RZ350, why didn't Yamaha ever put that YPVS in my Banshee? :o| :Rockon:

Oil Run it. I got mine back from the dealer and it was over the mark by .25" also.

Have a buddy on a 08 Phazer GT. Has been in the shop for reverse problems and hand warmer update ??? Not sure what they did but the results are in !! Cold Hands !!! Are the results the same for this model as the Apex models when changing the wiring ? Are there any others Phazer...

Y pipe I would like to see the difference in the size of the two pipes, Stainless vs Titanium. Even though the Titanium is lighter is it because the wall thickness is thinner to acomplish the weight savings ? It seems to me Ford was doing some testing with Titanium on the Focus Exhaust...

Gear change Me too ! What is the majic number for top and bottom ??? Anyone ??? :Rockon:

Dry Bearings When I pulled my suspension this year to add the BIG BOY spring I pulled all the wheels and packed the bearings. I found all the bearings were dry ! Zero grease in them and thats on a 06 model. I also replaced the two top idler bearings with new bearings and pulled the grease...

Clips Last year every trip I made 150 - 300 miles each, I would throw at least 10 track clips religiously. Every time !!! After changing all but 3 on the entire track I pulled the limiter strap up all the way to see if that helps. Pain in the butt every trip installing clips. I have a...

RTV Dealer told me to add the RTV. Said It should have come from the factory with RTV on them. They have added RTV to all doughnuts being replaced.