Search results

Bought a 2006 vector and it won't rev past 7000 rpm. Cleaned the carbs, clutches and everything is fine. What is the device on the side frame with the hoses going into the oil tank and air box? The carbs have butterflies and slides. The slides are connected to the throttle cable but how do...

Bar installed last week. Second ride today with it. Huge improvement in handling. sled does not dive in corners or loose snow anymore like it use too. Great addition! Love it. Should have come with this.

2011 Apex code 81 Installed yamaheater the other day and can't get them off boost mode or get rid of code 81? Any suggestions?

where are all the turbo viper reports and videos?

Buy a 100 watt oil pan heating pad from Canadian Tire and glue it with the silicone supplied to the oil tank. Plug it in an hour before your ride and you're good to go.

Okay sounds good. Sway bar ordered. 02Viper i see you have the ulmer air lid just wondering if it made any difference. I have the PC5 and clutching and don't see a lot of difference.

So do i need any other parts, bushings, etc. Is it pretty straight forward to remove and install?

No problem. Thanks for getting back to me Kevin.

Do you still have it? If so wanna sell?

Anybody try this on their machine? Did it improve handling? Where did you get one? Thanks

I like the thought of a turbocharger but i don't want to be riding and have to look at the boost and A/F gauges every second. I don't understand why they are required when A/C and Poo factory installs don't require it.

Turbine Man can you give more detail about the gearing change please. Does it make it worse or better? top speed?

that's pathetic they don't let us ride them! that will be the day i take a day off work to only look at them mean while in the states they ride m.

If you look at yamaha's motor history in other power sports such as boating and waverunner's they have never put out a turbo. However they do build a supercharger for the 4 cylinder jet boats. This is what I believe will be released. A supercharged 2 or 3 cylinder model. The reason being...

Yes it's on the throttle body. What does it do? And is that normal to make that noise?

Does anybody know what the electric device on the fuel injection rail does? It's located 90 degrees right angle next to the TPS. It is pictured but not identified on the fisch. It makes a sound when the key is turned on and also when turned off. Thanks

When cleaning the secondary does it matter how the two faces bolt back together? Where the balancing holes are does it effect the clutch performance?

Could be the fuel sender from the tank was not re-connected after changing exhaust donuts.

The bolts for the tunnel protectors are accessed from the tunnel not under the seat. To get at them you will need to drop the rear of the suspension.

Yes that is the number 805. Probably need less weight in the tip.