Search results

Awesome. I appreciate all the feedback. I will contact momentarily.

Trying to order new ski for my ‘07 Apex though the guy from curve industries never calls me back after the guy transfers me to him. Why is it so difficult? Do they not want any business?

looking to spend up to $160 for a new battery for the ‘07 apex. Any recommendations would be helpful please thanks.

I appreciate the feedback. I’ve decided with your help of course that I can get another year out of this track it’s not all that bad. It’s only got 6,000 miles on here but it’s east coast rough terrain and it’s a 2007 so it’s getting up there in age. Another point was that the tracks aren’t...

Hey thanks for the tip. I have concluded the helicoil and am very impressed. Everything turned out good. Highly recommend.

Hey, Can someone lead me in the right direction for in terms of a new replacement track on my ‘07 Apex. Original track Ripsaw1 (pictures below) has taken a beating with rough trail riding in the mid Atlantic states. What thinking of replacing with ripsaw 2 though there all sold out and need...

If I need to re-tap what size is the drain hole size to get it close?

Hello gentlemen, I have this issue with my oil drain plug underneath the sled. I believe it cross threaded and is damaged. Can anyone point me in the right direction on how I might get this issue fixed so oil doesn’t leak on me please. Thank you in advance for your suggestions.

In terms of removing flex pipe clamp bolts where can I just cut them...will I be able to slavge the clamp at least?

Does that require dropping the skid and getting track out of the way....I was hoping not to do those things?

i have come to a cross roads in the part of the exhaust donuts diy where the Allen key bolts are located in two areas. Underneath gas tank under grommit are stripped/rusted. Second areas are the exhaust donut boots Allen's are beat up. What can I possibly do besides the usual retraction...

Pictures anyone would be beneficial. Thank you.

Not following. For what year,type mountain sled? Need more info and possible a place to purchase it from would be great.

Need help with finding the right type of throttle cable extension on my '07 apex. Situation is I have a small 2" pivot adapter on my handlebars and the throttle cable was doing fine for awhile though now i'm finding that my tors code keeps coming up sporadically because of the throttle cable...

Thank you so much. That seems to be the reason since I had just installed a new belt.

How do you loosen belt if too tight? I have in fact heard some squealing as well

With my sled slightly elevated off the ground my secondary sheave turns (w/track) as does the brake cylinder on the other side. This is at idle. Is this a common thing while elevated or does it need to be corrected? and how if so?

I just installed the excell's i guess time will tell although i think there constructed well. I have a non-studded track. used pioneer performances extension blocks for all my wheel location. Should be a perfect match.

Is it fine to cover the ECU of the apex 2007 (located up in the "worst" location front bulkhead area with a terry cloth of sorts? or will it cause excessive heat and damage the ECU? Thanx in advance for the help.

How can you tell if your track is on its last days? I have some minor fraieing and the rubber studs are begining to wear off? Can i get one more year out of it at least? 4500 miles on this original track.