Search results

yea everyone is saying the geometry will be alittle messed up one thing you will have to do is run your track tension on the loose side or the suspension will not compress its full stroke because your track will run tighter as the suspension compresses if that makes any sense i used the oft...

i did the same thing with my 06 rtx i went from a 121 to a 144 this summer and i also used the pioneer drop wheel mounts on all the idler wheels and also installed two extra per side back where the extension kit mounted to the end of the old rails i made the new rear idlers look just like the...

i have just finished my 121to144 extension is there a different set-up i should now be using for the rear mono set--up i have the heavy spring done as well as the revalve from pioneer any help would be appreciated thanks

had a look at mine only has one set of machined flat sections on each heat exchanger for bolt to rear suspension thats why i was looking for a measurment to install new larger brackets?

i checked it out again it was my mistake i was looking at the wrong model once i pulled my head out of my #*$&@ and found the correct model all parts needed are there thanks the brackets show a price of 46.00 bucks each not terrible.

thanks for the info. i was looking on the parts page i can find the wheels and brackets but c`ant seem to find the shaft or spacers the wheels mount on a friend of mine has a ltx 40th annives. an 08 thats what i`ve been looking up parts for as it has what i`am looking for but i d`ont see the...

hi guys i`am looking for an exact measurement for the brackets that hold the small wheels and the axle they are mounted on at the rear of the tunnel on ltx models the axle or shaft that holds these small wheels are actually mounted to the tunnel itself not the skid.i`am installing an extension...

thats what i was wondering if i had enough track length to do that i will have to do the install then i will know one way or the other if the tracks not long enough i try it as is this winter thanks for the feedback

i was thinking about putting a set of the yamaha rear brackets that the long track apexs use on the rear of the tunnel and then i could mount a rear upper axle and wheel kit just the same as the ltx`s use the one thats mounted to the tunnel in the rear this should allow me to adjust my track to...

i`am going from 121 to 144 this summer with an extension kit from oft got the rail extensions on they look like a work of art , what do you guys think of putting an extra set of wheels on the extension itself it looks like a long section of rail there with no wheels ,i was thinking of useing a...

ice ripper i`ve got a brand new ice ripper xt sitting beside my sled ready to go in when time permits going from 121to 144 this summer ice ripper xt part no. 9173 got mine from sled werx 779.00 had it in a week ,brent is excellent to deal with and no boarder b/s to deal with. the ice ripper...

i`am waiting for an oft 144 extension kit right now for my 06 apex i think the 6 degree tip up will help alot on groomed trail it shouldn`t handle to terrible if the trailing end of the rails is not flat on the trail but tipped up slightly also i have had the heavier spring and a revalve already...

anyone know if its business as usual for oft,ordered some parts sent a couple e-mails never got any responce ? whats up

friend of mine had same thing last year his shock icon would come up for a second then return to hand or thumb mode turned out his needed a computer ,cross your fingers its only a harness or shock soleniod.

did you have to trim that aluminum frame section directly behind your heat exchanger?

so you never had any interference issues or rubbing at full compression of your suspension?

so top gear down to 23teeth and leave bottom gear at 38 teeth? is there anything else that has to be modded.

when going from 121 to 144 will i have to move the small heat exchanger which replaced the crossover tube from its factory location to the rear of the new tunnel extension?

going from 121 to 144 on an 06 apex rtx whats the track to choose an ice attack or an ice ripper any one have any info? i think one of them is availible with a 1.375 lug is there room to run this without modifying anything?

i think i made up my mind to go from a 121 to a 144 on my rtx i`am leaning toward oft racing or muffin works for the kit any input would be appreciated one other question is about tracks i `am thinking an ice ripper or an ice attack i like the pre studded thing should be some what lighter then...