Search results

I had like a 6'' tear right through... i debated on trying to weld it but it was too big and bad

well so far its 450 for heat exchanger.. need a new jackshaft bearing, coolant and chain case oil, roughly 8 hrs of labor.. looking at around 1800 bucks with taxes for the dealer to do it

delete

bump

delete

appreciate it! My belt is fresh.. just a little looser after my clutch kit install for some reason? The top of my belt is even with the secondary. I usually have the teeth of the belt an 1/8th above it... or have the lower part of the belt flush with the secondary.. (kind of tough to...

I need to tighten my belt and need to add a washer behind my three bolts in the secondary clutch. Just wondering if anyone knew the size of these small things off hand? Thanks!

okayy, thanks alot for the help guys. Looks like I may be placing another order to you Ulmer lol

how are they different?

Im just wondering if the 09-14 nytro oilite bushings will fit a 2008 Nytro RTX. I found a good deal on them but they say they are for 09-14. Thanks in advance!

I'v been seeing this decal kit forsale online and its pretty cheap. A couple of my stock decals have some marks so updating for a cheap price would be nice. It looks like this kit is from Yamaha. The part # is SMA-FXDCL-00-BL. (http://www.ebay.com/itm/Yamaha-FX-Nytro ... 15&vxp=mtr) Does...

Would a pc5 and k&ns make much of a difference? Now I'm debating just throwing ulmers clutch on

No I do not have extroverts, not something I was planning on but is it something necessary? What product were you thinking and why extroverts?

Glad to hear! Anyone else?

Hi guys, Im looking for some feedback on some mods I was thinking about doing this winter to my sled. 08 nytro, 144 studs, pilot skis, hindle slip on. I would like to add ulmer clutch kit, k&n air filters, and power commander. Has anyone done this mod? If so how was it, and what can I...

i know the bv2s is the best but i was seeing if anyone was using anything else. Hopefully I can find a good deal on one this weekend at the show in novi

I am going to be buying a new helmet, just wondering what people are using. I prefer not using an electric shield. The only helmet i'v been hearing good things that doesnt fog is the BV2S helmet.

yes just the 2 springs on the bottom

just say i did have an air leak tho, what could go wrong or could it be bad. im pretty sure its fine now but just to make sure I may put some type of sealer over it. i have some hi temp Silicone Gasket Maker

say you have a slight air leak where the header attaches to the muffler, are there any negatives to this? I have the hindle exhaust and there are no clamps or anything, it was a little bit loose but once everything is tightened down I think it sealed up. I was just wondering the worst case...