Search results

Yes enough that the clutch engages. I need to look at all the power and grounding blocks. Need some help knowing where they all are.

Ok so if it will run and idle perfect if u hold the in crank position with starter disconnected. As soon as u put key to run u lose power to fuel pump.. hot wired fuel pump and it stays running but also blows 10 amp fuse at starter solenoid. There is a new starter solenoid and fuse in it. I...

No Tors code it cleared when i spun new speed sensor. Got 55 psi at fuel pump. Whats next. There are no codes being displayed.

Thanks guess ill test the fuel pressure next. Should be 45psi I think.

Well put new start solenoid in. It will stay running if u keep cranking it. Im confused on the 4 relays above left footwell. I have 3 unplugged and it still does same thing. I thought one was load and one was fuel injection. So i assumed 2 had to be in there to run. What is the one that has...

Im thinking fuel too going to check pressure.. it ran before the start solenoid gave me a problem.

I posted a video 2yrs ago cant seem to figure out how to repost it. Oil is full. Imagine starting ur sled starts perfectly all 4 cylinders then as it hits 1800 rpms u hit the kill switch. Im going to replace the starter relay solenoid. It was very corroded. And i cleaned everything up. It...

No critters. Fresh non ethanol 91 gas. I would thinks plugs are OK because it fires up instantly revs to 1800 then shuts off.

This has been a 2yr on off project. Started with a bad speed sensor codes 42 & 84. They are cleared. There are no visible codes as now. All grding blocks checked. Clean no corrosion. Starter relay was cleaned and it looks good. Relays have been swaped around several times. Fuel pump...

No it will not stay running if you keep using the starter to run it. I know theres a oil pressure sensor some where maybe its not reading any pressure and shutting it down. Theres way to many sensors and connectors for all this stuff. Id rather work on my older audi A6 than this thing...

The sled will not stay running if you give it any type of throttle. and it will do what the video shows all day. If I pull the fuel pump fuse it will not start so Im guessing that's ok. I had a issue with the starter relay and had to replace that, wouldn't even engage the starter at that time...

Thanks for the Help Im going to check the voltage at that fuse. Hope to get it to run tonite, but I will be ordering a new relay Wednesday. Thanks for the help.

I just had the starter relay out to clean the connector to the relay because it would not crank over. Everything was all green and crusty. I cleaned everything and put it back together. Now it cranks over great but will not stay running. I do not hear the fuel pump running when I turn the...

Yes warrenty issue on donuts and pipes. I picked up a used attack that the own showed my a recipt from a dealer replacing the entire system but the rear can.

Cable adjuster Thanks for the pic now I see why mine wont stay in. Missing the large plastic cover. Hope the new one works.

I have 2006 Attack that the cable adjuster from the shock came off. Can anyone tell me or take a picture of the routing of how to put it back in. It looks like it should go thru the wire frame thats attached to the arm? Parts fisch really dont show anything.