Search results

I did a Polaris edge with fox clicker swap and just did 2000km on it and love it. Was a pretty simple swap.

My 03 runs about 160 with a good conditions and 180-185 in low snow.

Spr5088 I did get it to work had to use the apex plastic shields and the rx1 tips. You have to bend the steel flanges in the bottom of the pipes in to get the angle to match the exhaust shields. Also have to washer the single top bolt out. If u cut the brackets off and re welded them on the...

Half baked powder coatings did the beef up kits. Not sure if they still do them

Clean carbs and sync

What color are your plug tips?

What about a partial gut of the stock? It's louder but bot crazy loud and sounds good to.

I actually ended up sending it to a local repair guy and it was the main jet needle seat or something of that sort plus they were out of sync(sync doesn't have much to do with the abundance offuel that was coming out) but problem is solved and sled is running better then ever before.thanks for...

The sled starts and idles perfect. But as soon as touch the throttle the gas come pouring out of one of tge carbs. I will check the tors. And give it a clean. How do you no if a float needle Is failing or not seating. And how do I check/change float adjustments. Thanks again best winter I've had...

So I looked at it some more tonight and it's running so rich that it's dumping fuel into the airbox on one carberator. And I'm also getting flames out of the tail pipe. Any help would be awesome thanks.

I did clean the float needles. But I'm going to try cleaning the carbs again.if one float needle was plugged wouldn't just one cylinder be running rich? All the plugs are black.

I have a 2003 rx1 that is getting overloaded with fuel. I put brand new plugs (cr10ek) in and after an hour of running they are jet black but not wet . It has a very bad bog when I give it throttle until the engine catches up and then it runs ok. I have cleaned the carbs. Replaced the plugs...

Should also tell him touse the copper exhaust donughts last longer.you get them from sled toys

Can still run the ulmer kit. Just doesn't come with the upper bushings.I have them in my 03.

Just so everyone know you can still run the ulmer kit for an 03. He sells them without the upper bushings. So u just have to run stock bushings in them.

If ihe lost his coolant over the summer when he wasn't running it I don't think it's a head gasket. If he is using coolant and tge head gasket is gone it is either getting burned or you should be able to see it in tge oil

2006-2007 nytro seat also works. Also think vector mountain but not for sure

2006-2007 nytro seat also works. Also think vector mountain but not for sure

I put the olite kit from ulmer racing. Great kit and better quality then stock. You will find a lot of people on Herr are using them. Think it runs about 120$ for all bushings.

Have you checked your suspension for cracks worn out parts? Might sound odd but noises can travel. Might be worth a look to rule out