Search results

Thanks for the feedback Tony. I'm putting this on my fridge!

If relay is clicking, check for mouse nest on top of fuel pump.

Glad I could help

X2. Scott is great to work with.

Thanks for the feedback. Hope to see you out on the trail. Something tells me ill be able to pick you out of a lineup pretty easily with that machine.

Thanks for the feedback. I always try to go the extra mile for my fellow snowmobilers.

I would suggest going to dianostic mode on your speedo and start testing your coils, injectors, etc and see if you have issues upstream of your coils. Do you have a service manual? I had a bad ecu result in only 2 coils firing. you could swap them around and the same 2 positions would not...

The new in helmet speakers he has are sweet. Especially when I'm listening to my favorite Britney Spears jams on the trail.

Good to know. I'm planning on grabbing another kit.

Ok. I'll leave this post up for science. Looks like the Apex and Vector seat pans are different. not quite sure why they changed but they are definitely different. I put the vector seat on an Apex and it looks ok but is sloppy as hell. Looks like this applies to 12 and up vectors.

Ok, so I have a 2008 Apex seat pan with a wrp seat on it and I'm having difficulty getting good it installed on the 12 vector. I have done a million seat installs and it seams like the seat hooks aren't low enough to hook the gas tank. Anyone else run into this?

No. I just took a set of a perfectly running vector and threw them on. Sent from my SM-G930V using Tapatalk

Ok. She's back to 100%. Definitely a carbit issue. I believe based on the amount of gunk, these carbs had no hope of clearing out just pulling the bowls and cleaning at an amateur level. I think that explains the poor idle but I also believe they were out of sync due to the popping and...

Sweet. Thanks for the info.

I've never synced carbs before. I'll have to study up on that. I converted to Yamaha and went straight to fuel injection.

Ok. Thanks everybody for the assistance. Looks like I've got some work to do. The carbs were filthy. Almost every little hole was plugged in the Jets and pilots. I suck at carburetors so I may just swap them out with a good set and see if there is any change in performance. Along with...

I'm working on an 05 rage for a buddy and this thing is running like crap. First it wouldnt run at all. Cleaned the carbs which were filthy. After cleaning the carbs, sled ran but running rough and popping every now and then. You can get on the throttle and the sled seems like it's got...

Trail jamz now has boomers. Way better than the original setup.

Don't forget the collar on the jack shaft. Small torx set screw needs loosened and collar slid on the shaft. If that's off then rubber mallet top right and bottom left to loosen the pins.

Awesome trails. The Wolf loop was my favorite. Rockys on the lake was a good place to stay minus the out house at sub zero temps.