Search results

I found the 23 /39 works the best. My sled with a Altman 54/44 is a monster out of the hole these Apex's are maybe 112mph on a good day, so gear them that way, for more top end we need someone to start cutting lower finishing angle helix's..guessing 48/36.Probabley gain about 9 hp to the track...

Drill bit

You will have a minimal amount of play in your reduction bearing.

same belt in Canada is $100.00. god we get ripped, trade off I guess you guys have Bush.

you have to change the jack shaft, and its proven Cat and Pol make better Clutchs . more manuverability.and 40% cheaper.

Proline kit I would say your about 300 RPM out. I had that Proline kit for 3 weeks when it first came out in Jan 2006.sold it here on this site..I ended up wrapping to 6 and 3 >> 90 degree.s .watch you don't get the secondary sheave's to hot it will draw out your inner bushing split your...

I only use OE Dan especially when Iam rebuilding prime's or sec's so that blows that theory.as far as wrapping the white spring by 10 more degree's I don't think that would make this thing self destruct. especially the White spring...BUT MAYBE""Iam not ruling anything out.. I had 8 miles on the...

Ok this is what I did.. Nov I replaced my bushings on my Dalton Helix and my inner sheave on my secondary. I though there was a little to much slop and I had approximately 1700 miles on them hard lake running so there cheap replace them... I red lock tite them reassembled and drove it 5 to 6...

:bling last night on the lake , the Apex let me down at the worst time over 3 inchs of ice,,,,,.end result, in sequence.belt blew into 1 inch pieces,,,,.bushing i figure let go on the inner sheave of the secondary, in turn destroyed my buttons, ramp , helix, , pushed out the bushing on my...

2007 MXZX600HOSDI great sled,she came off a 2001 800XCRTriple. her only complaint is a little less balls in the heavier going, mine I can't catch her if she gets the jump. "THE 1 TON CHALLENGE"

I read some of you are paying $3.50 a gallon for gas that converts to $4.20 imp... per 4.5 litres of fuel per gallon.. get a load of this where paying $1.14 pr/litre xxxx 4.5 ltr/prgal =$5.13 pr/gallon imperial..Id stay at home..

Re: Little league's The Sequin sucks.ranks on my list as one of the worst trails in Ontario.

Little league's little league's if you will.. :die You must have whacked a few tree around here have you rookie ?????.most of the trails are hydro cut in North Bay area, just beautiful scenary looking at all those polls, and line;s, really the only thing North Bay is good for is a gateway to...

change yearly or every 2300 hundred miles.

pitting Hey.. get rid of the emery or sandpaper,,,, scotch brite buddy, and my secondary is the same.. pitting comes from the casting procedure..

Thanks... I new it was something odd.. I thought it was 90 backed off to 50. I"LL do it over.. Bill

Ft /lbs torque for Primary main Bolt. ????

R U sure this guy is not talking Secondary,,,moving a jackshaft up and down or a primary on a crank shaft side to side is far beyond normal, you will find your upper jack shaft bearing toast.or something has gone array in the moveable sheave on the primary..But then there's Mike's opinion... he...

Zero play. bearing on Jackshaft is toast,, next your jackshaft... these thing need grease hubs with nipple's, replace upper and lower dry side yearly.

absolutley,, kerrrrrrrrrrbang, ever hear a 4 stroke go.. they don't squeak..