Search results

New Bushings I'm replacing the bushings and the one's they sent don't fit? 90381-16n51-00 are good on the bolt, but don't fit the tube. I'm replacing the lower Arm Bushings. And I didn't get the nylon washer that sits in between the arm and frame. What # is that ??? I replaced the...

I just added a 1/4 in shim to the rubber on each ski on my 05 vector and my 08 vector. Will see how it works! I have 6 in Woody Slim Jim's on both sleds. Seems like the 08 vector has a bit more up lift, did they change something on the 08's? I used 1/4 rubber x 2ins from a glass...

Slim Jim Doolys With 96 studs you think 4in dooly are fine? I like the 6in dooly but maybe a bit too aggressive. I plan to change the stock ones on my wife’s sled, but I ride it too. Thanks!

Thanks for the repy Thanks, Yes I know about the length 4 6 8. As you can see I have 96 studs. I know it's HP/Studs/ Carbides = control Just want to know what people are using! Thanks agian, Tom in CT & VT

4 or 6 in Dooly? I've been using 6 in Dooly and they do a good job. What is the difference between 4's and 6's ? What's everyone using? I was going to go with the new slim Jim woody's 6 in On my 05 Vector or 08 Vector. Thanks, Tom in CT or VT

Thanks! I changed the wheels, had a bid of a time with it, but got it done. Not a small job, but learned alot. Glad the 08 has a different chassis. Thanks for all that helped! Yes I did a search, looked thru all 254 post. Tom in CT & VT

How many bad wheels out there? Please let tell me about your bad wheels and how you changed them. Have you changed with after market wheels? Thanks, Tom in CT & VT :yam:

Wheel change I guess I'll unload the shock and try and get the wheels off. Has any one changes them? Will do it tomorrow! Thanks for any help! Tom

No buddy can help? I took both set screws and bolts off the upper wheels, now I need to know what else has to come off or swing down. Wheels are on the mono shock on the inside, about 5 in wheels with holes in them. I was toll to replace them both. Is anyone change the wheels to after market...

How do I change the front inside wheels on my vector? I took off the outside wheels and the bolts on the inside wheels. Do I need to change both? Thanks, Tom in CT

2 in riser I did a 2 in riser on my 05 vector and no problems with cables. Only one thing is now your hands get cold from the wind. I need to add hand guards. Anyone have suggestions? Thanks

Did you find the answer to this questions? would like to know. What reading should you get? Thanks, Tom

I have a friend that has an 2003 RX-1 with about 3,000 mile. The sled runs great, but uses oil. I've noticed when following him his sled smells and spits black oil droplets. The dealer said he hasn't seen a problem, 3000 miles is not a lot. Could be rings or some kind of clog ??? Any...